• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. trailpsycho

    Windshield frame repair

    I had a buddy tig weld mine... He is a pro, so it was no big deal for him. The metal is pretty thin...and, obviously, fatigued and likely rusty...it would be worth it finding someone good. Door parts are expensive. You may not need to remove the glass, if you have someone tig it, but...
  2. trailpsycho

    Update from the Busted Knuckle Garage - After the Fire

    Where did you score the rocker switch/12V assembly that fit into the ash tray? Me likey! Truck looks great!
  3. trailpsycho

    insurance

    Robyn Terry is a good dude. Great rate for my Bronco. There are restrictions on mileage and usage. However, if your going to go off-road, I can't believe that any sane person would try to make a claim. Cheers! John
  4. trailpsycho

    Any Advise I should pass on to body shop?

    Make sure the rear quarter seam is adequately treated and re-seam sealed. Mine was not and is worse now than it was prior to media blasting and repainting. They tried to fix it a year or two afterward and it came back again. The only way to really fix it now is to replace the rear...
  5. trailpsycho

    Body Adhesive for radiator support and inner fender

    I would consider those pieces structural and not suitable for BPA. Unless you were complementing with steel (SS) rivets , but why not just go ahead and build it properly and spot weld the panels. I suppose you could install rivnuts and use SS fasteners, but it's a lot of work. BPA is good...
  6. trailpsycho

    4X4 jamboree in Indy any one going?

    Not planning on going, but will be out and about all weekend, PM me. Probably will be out to check out the post-party@ 4-wheel parts before settling in for UFC 165. Cheers! John
  7. trailpsycho

    best performing engine for a bronco?

    You can look at my sig for my configuration. I am probably heavier than many due tothe galvanizing, full Line-X treatment and extensive cage and storage...guessing at or a little over 5K lbs. The reality is that I see 12 consistently driving aggressively or putting around town. On the...
  8. trailpsycho

    best performing engine for a bronco?

    I like my 96 Explorer EFI 5.0 , it makes enough power...well almost. It runs great. I installed a Crane aftermarket cam. I have had several conversations with folks about my frame off and what I would or wouldnt do different. Over the 4+ yrs that its been back on the road, I've been pleased...
  9. trailpsycho

    Indy Jamboree Sept. 14-16th at the Indiana State Fair Grounds

    Saw several rigs starting to show up at the fairgrounds this evening...buggies on trailers. I may come to the Jamboree as a walk-in, but I doubt I will pony up the $70+ to drive the Bronco in. I would be up for getting together for some food or beers during or after the event. There is...
  10. trailpsycho

    Indy Jamboree Sept. 14-16th at the Indiana State Fair Grounds

    I doubt I will go to the Jamboree. But if you guys want to grab some food or beers while you are in town, I might be able to stir up another Bronco or two. My buddy, Jake, is wrapping up a EFI, 4R70W, Atlas 4-spd conversion...it may be ready by then. Rod knows how to get in touch with me...
  11. trailpsycho

    looking for some king,Fox, or bilstein 7100's

    I got my 12" Fox with reservoirs and adjustable valve-dials (8 stages, I believe)...they were ~$250 each shipped about 1.5 yrs ago. Beautiful pieces and they work as advertised. I bought them through Offroad Wareshouse in CA. They were great. I dont recall my valving, but they need more...
  12. trailpsycho

    broncos w/ black wheels thread

    As I told l told Luke via PM, the Bronco color is technically a secret. I made a promise to the gentleman who shared the color code with me several years ago that I would not proliferate it on the internet and so I have not/will not. While the other gentleman and myself both love the color, we...
  13. trailpsycho

    Does anyone make a snorkel for early Broncos?

    My fuses and my intake tube and axle/trans vents are mounted somewhere about 3.5 feet high--possibly higher and approadhing near 4 ft....not sure why I would ever want to go that deep. Our house is on a river within a flood plain. If its over 3ft deep for me to get there...I have already...
  14. trailpsycho

    A rampage about Rampage

    Dude, I am sorry that you did not do your homework. The fixes for the door post and mods for the door frames have been around for years and are listed in more than a dozen different threads. This is Bronco-land. There is a certain amount of personal responsibility to owning, operating...
  15. trailpsycho

    Engine STILL cutting out while accelerating problem SOLVED!

    It doenst take much of a blockage to cause the motor to sputter or stall out under throttle. When I first read your post, I was thinking it was in the tank, but you should probably replace the lines anyway. If that doesnt cure it, it very likely could be sediment in the tank blocking the...
  16. trailpsycho

    Comment by 'trailpsycho' in article 'Clean Windshield Braces to Roll Cage'

    Nice job! Ill have to remember that trick with the aluminum for a base for a future project.
  17. trailpsycho

    Vent Window Repair

    You have to remove the main glass from the window, then the window felt top and along the sill, next on the periphery of the door frame there are small screws. There is also one large screw just below the pivot of the vent window. With Ll this out of the way, angle the vent toward the latch of...
  18. trailpsycho

    Torque steer

    Personally, I would ditch the stock track bar mount and go to an axle riser bracket....assuming that you are sporting the track bar drop bracket. As well, the drag link with the big S in it is troubling to me. I guess it may be OK, but it looks questionable. I have a similar setup (lift...
  19. trailpsycho

    Roll Cage Kit

    Have you looked in the Vendor Section. Mike from Extreme Custom Fabrication puts together kits for folks all the time. He has many more options than the other folks noted above. He's been part of the community here for a long time and is good people. FYI...
  20. trailpsycho

    4X4 trailer ideas

    As others have menitoned, check out www.expeditionportal.com go to the forums and look for the trailer pages. Lots of cool build, great info and awesome ideas. Their search engine works pretty good as well. I would stay away from the torsion axles. If you want to go independant, consider...
Top