• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. Tedster100

    11 Days To The Roundup and My Rig's On Fire

    Went to get some parts yesterday and the Bronco wouldn't start. Then it acted like the solenoid was stuck & kept spinning. I got out to get a wrench to disconnect the battery and when I turned around smoke was pouring out from under the hood. Fortunately it looks like the solenoid to battery...
  2. Tedster100

    Custom Air Locker Compressor Build

    I wanted a compressor to run my air lockers so I put together a Viair unit and tank that would fit under the hood. I know you can buy a unit from ARB for a couple hundred but I wanted a small tank too so I built this. I retro-fitted a propane tank adapter so a camp fuel tank could be used to...
  3. Tedster100

    OH 1965 Truck and 1979 Medium / Heavy Truck Manuals

    I have a set of 1965 Truck Manuals Vol 1 & 2, I think that's the complete set except for the delivery and maint. manual. They are in decent but well used condition. Also have two 1979 Medium & Heavy Duty Truck "Body, Chassis & Electrical" manuals. These are a little rough and neither has the...
  4. Tedster100

    Differential / ARB Issues, Need Advice **BINGO**

    Last week I had the Bronco out and about a mile from the house it made a little bang in the rear end that sounded like the t-case popping out of gear. After that - no forward movement. I stopped and looked to see if I had a u-joint or drive shaft problem but everything was good. After getting...
  5. Tedster100

    Yoke Problem / Question

    I cracked a u-joint at the rear diff a while back and now I'm going thru them like candy - maybe 20 miles & they're done. After talking with Tom Wood (excellent guy by the way!) he said it sounds like the wrong size cap causin mid-alignment. Upon closer inspection I found that one of the...
  6. Tedster100

    Survey....How'd You Get Your EB

    I ran across this thread and wanted to bring it back since it’s such a great subject but it’s in the archive section so I thought we’d just start a new one. I added a poll so we could get an idea of how most of us came to own the best classic 4x4 out there. Originally posted by 1977: “Tell...
  7. Tedster100

    Rear Axle Breather

    I bought a set of axles set up with ARB's and installed them under my rig. There doesn't appear to be a breather on the rear axle and I'm leaking from the seals (probably from the diff warming up & air pressure forcing it out). I was thinking about putting one in near the end since I'm going...
  8. Tedster100

    EB Sighting In Barberton, OH

    Was headed to a cruise in tonight and saw a really nice Bronco heading away from the show. They saw me too.. anybody on here?
  9. Tedster100

    Broncos on Master Chef

    Watching because the wife wants to and all the sudden they're on the beach with a bunch of Early Broncos! Didn't show them long but they were nice.
  10. Tedster100

    I'm Seriously Hard!

    Or at least my Bronco is.... Left work today and on the way home I was in traffic and there was a Jeep up ahead. I pulled up along side it at the next light, it was probably a 2006-2009, lifted with larger tires and nice rims. Oh yea, there were two 20 something's in it with the top off...
  11. Tedster100

    ZF Transmission Question

    Will a ZF from a F150 with a 4.9 in it bolt up to a 302 motor? It was listed as a 4.9 may be 4.6?
  12. Tedster100

    White Bronco With Black Soft Doors in Ohio

    Saw a nice white Bronco with black soft doors on Hartman Road in Wadsworth, Ohio yesterday. Is it anyone here?
  13. Tedster100

    OH Rear axle, springs, 2.5' lift, bumpers, bushings

    I have the following parts left over from my build: Stock set of rear leaf springs Newer stock C-bushings and track arm bushings barely used (I put 6 deg on) Coil cups and retainers, the lower coil retainers are rough but the cups are good. 2-1/2" lift blocks for stock leaf springs, with...
  14. Tedster100

    Raptor Lining Hard Top Advice - Updated - The Build Continues..

    Ok, I picked up a good hard top with only minor issues and I'm going to Raptor Line it so it's a little tougher than paint. I've also ordered new window gaskets. Any advice or tips to make the process easier or better? I'm a little concerned that maybe I should paint around the window...
  15. Tedster100

    There's a Jeep in the stable now...

    I know, but I needed a dependable daily driver for the wife and didn't want a mini-van so we picked this up a couple weeks ago. It's a Rubicon and it still has nothing on the Bronco! I took the Bronco when we went to order it and the sales manager asked if I would trade it, told him - even...
  16. Tedster100

    Dear ford:.......

    Ok, after reading several threads on why Ford is missing the boat on NOT having a Retro Bronco, I figured it was about time we put a wish list together on the perfect Retro Bronco! That way, just in case they're listening we can do all the market research right here, all they have to do is build...
  17. Tedster100

    OH Misc Parts

    Ford 9" rear end,drum brakes, and all new brake cylinders, pads and all new hardware with less than 500 miles on them. The 9" is a solid housing but does have a seal leaking on the driver's side and at the pinion. It has a bracket welded on the top for a traction bar link. The gears went on the...
  18. Tedster100

    Picked up a vintage winch for my vintage ride

    I was knocking around on Craigslist and saw a winch bumper close to my work so I looked at the posting and lookie what was on the bumper! A 8274 from a Jeep. Went to look at it and offered the guy $300 for just the winch and took it home. Works perfect, just needs a little cleaning, some...
  19. Tedster100

    OH 9" & d44 axles 3.50 gears complete

    DANA 44 IS SOLD.. I have a complete set of axles from my 73 for sale. Ford 9" rear end and a Dana 44 Front. Both axles have drum brakes, and all new brake cylinders, pads and all new hardware with less than 500 miles on them. The front has the original Ford locking hubs. Both axles are...
  20. Tedster100

    Tired Of Looking For 3G Pulley

    I put a new 3G on my Bronco a couple months ago and with the stock setup and 3/8 belts the small pulley squeels now and then. I found the thread with the part numbers but couldn't get anyone that could cross reference so I went to NAPA and found one that was close to the right one. When I got...
Top