• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. R

    67 Bronco Build

    Great 94 I was close but the pictures help. I noticed on a few of the builds that the J bolt is on about the same angle as the strap instead of straight up and down. I guess as long as it hold the tank is the main thing. I will get a picture of the 2 small open tubes kinda right near the top...
  2. R

    67 Bronco Build

    Can somebody give me a measurement of the rear fuel tank strap bends. They look to be about 4". Not sure about the angle maybe 33 degrees or 45. There are 2 small hose lines up near the top of the tank. I saw a picture where a guy ran a U shaped piece of hose to block off I guess.
  3. R

    67 Bronco Build

    Thanks man for the response. I was thinking that might be the way to go. One giant piece, done. Any particular vendor and or fitting issues.
  4. R

    67 Bronco Build

    Pretty impressed that my grave yard tank kit came today (Sat.) when it was due Mon. Even with the holiday. Pretty cool. Will get started next week.
  5. R

    67 Bronco Build

    May I ask, since I have rusted out floor panels but also have rusted out portion of the behind the seats running across. More difficult to install a one piece floor panel or do them in the available sections.
  6. R

    67 Bronco Build

    New tank kit coming Monday. The main fuel line from the tank to motor looks to part metal by carb. and rubber in the middle strapped to the chassis. Could not find a continious metal line to buy. For no I will use rubber to get motor running.
  7. R

    67 Bronco Build

    So today I ordered the gas tank and kit since I have nothing. Also removed the filler tube and cleaned it up a little. Baby steps for now. I know the motor runs with gas down the carb but the tank will let me get more things looked at. Then off with body a here we go. Hey after so many corvette...
  8. R

    67 Bronco Build

    That looks like a great way to lift the body. I planned on leaving the doors on to try and keep things in line as much as possible. Great pictures for me to follow, Thank You
  9. R

    67 Bronco Build

    I'm sure this has been asked a ton of times but could I use my 2 post lift to remove the body and roll the chassis out to do some work and then roll it back under. I believe the mounts are removed or gone. Probably a few other items like steering, clutch rod, starter wires ummmm Spot to...
  10. R

    67 Bronco Build

    If I get this unit I would still be able to add the 2nd small aux tank?
  11. R

    67 Bronco Build

    I was just looking at a tank kit from Bronco grave yard. Has the metal tank,sender, J bolts , strap, main fuel hose and a vent hose. Looks like all of that will fit. Thank you for the info
  12. R

    67 Bronco Build

    Well it's been awhile since I was here but I was able to get under the bronco to see what I need to get a main gas tank installed. I see the 4 brackets with rubber on them but I don't see anywhere to strap the tank or how does it stay in.
  13. R

    67 Bronco Build

    Okay now I see whats going on. Thanks for the pictures Jeff. Going to go down and look for the spot on the frame you mentioned for the strap. ZIO/ Roger
  14. R

    67 Bronco Build

    Okay, went out early and took a few more pictures hopefully in the right location. Right berfoe the rear bumper. ZIO
  15. R

    67 Bronco Build

    I know once I get into this build stuff is going to pop up. It does with the C3 vettes all the time. Anyway one thing the bugs me a little is I see so many post and a lot of them show a v8 motor. Why do I have only a 6. I know I can change it out but were the 6's that unpopuler? Sucks, wish it...
  16. R

    67 Bronco Build

    Awesome build with lots of pictures. I did see a glimpse in your early photos of the fuel line and a part of the tanl At least I can see where the main tank needs to be. Will take more pictures tomorrow. Thank You ZIO
  17. R

    67 Bronco Build

    Will do Paul, I just assumed it would be where those hoses were, oops!
  18. R

    67 Bronco Build

    Great, let me see if I can find your post and I will get back to you.
  19. R

    67 Bronco Build

    Took some picture of where I guess the gas tank goes. Still trying to figure it out. Nothing their except the hosees. RVZIO
  20. R

    67 Bronco Build

    Paul I will take a look underneath and acess what it is I need. Hopfully over the weekend. Super hot here in Florida right know. I'll get back to you.
Top