• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. R

    67 Bronco Build

    I will be getting ready to start work on the Bronco but I would like to get it running. Now I know the motor runs with a little creativeness but I want to put a new tank/sender in. There is nothing their right now. What else will I need to install a tank. Straps? Bolts etc? Anyone have any pictures?
  2. R

    BC Bronco's Dash available

    Sorry, newbie wants to know BC dash is what exactly!
  3. R

    Newbie with 67 U14 Bronco

    Great video. So that's what new stuff looks like. Thank You RVZIO ;D
  4. R

    Bronco 67

    Picked up a new ignition bezel. Car had none. Trying to put the key tumbler back in. Lined up the notch and the tumbler but it won't snap in and stay. Thoughts RVZIO
  5. R

    Newbie with 67 U14 Bronco

    I put the ignition bezel in the dash but can't seem to get the key tumbler in. I noticed the in removal of the tumbler you need to stick something thin into the small hole on the plate. Maybe you need to do the same to install? Thought for now before I start the restore I would keep things...
  6. R

    Newbie with 67 U14 Bronco

    Makes sense, I will rig something up for the front while on the lift. The body dollie I make will make sure front is supported. As I remove stuff I will brace off the body for sure. RVZIO
  7. R

    Newbie with 67 U14 Bronco

    Thank You! RVZIO8-)
  8. R

    Newbie with 67 U14 Bronco

    Bronco67 Pressure washed the Bronco today since it was 105 here in Florida. Mud daubers, mud etc. All of the body mounts are removed. Well 4 were rotted out and gone. Anyway can I was going to use my 2 post lift to lift the body enough to get the frame out. With that in mind I didn't think I...
  9. R

    Newbie with 67 U14 Bronco

    Bronco67 Noticed that there is no gas tank underneath. Looks like the forward gas cap has a large hose on it the rear cap has nothing. Am I getting a large metal tank, where does it get installed. 2 tanks or one. The metal tank or poly tank are 13 gallon units . I s that what they were? RVZIO
  10. R

    Newbie with 67 U14 Bronco

    Bronco build First time the tail gate has been open in 20 yrs. according to the prior owner. Anyway what's the bump out on the left of the inner fender for. RVZIO
  11. R

    Newbie with 67 U14 Bronco

    Bronco67 Started taking a look at why the tail gate doesn't open. Guess I will try to remove the handle section to see if I can work it open from their. Pretty rusty!
  12. R

    Berg Build

    Bronco I did not read the entire build but I was wondering what color that is. Thank You!
  13. R

    Newbie with 67 U14 Bronco

    Checked out Matt's garage. Pretty informative and for me better then reading.
  14. R

    Newbie with 67 U14 Bronco

    Some good points, thank you. I actually did get the Bronco running if only with a new battery and a little gas down the carb. That was pretty cool!. Need to hunt down that chrome ignition ring that holds the switch in the dash. I assume that would not be unique to just a Bronco.
  15. R

    Newbie with 67 U14 Bronco

    Bronco build How does this stuff go back in the dash. Anyone have a picture of what it looks like in the dash. RVZIO
  16. R

    Newbie with 67 U14 Bronco

    Bronco67 Looking at graveyard for a new gas tank and sender. Appears that the main fuel lines running from the tank to up front are not steel or just get the rubber lines available. Tanks seems to be polyethylene. All that ok or try to go all steel.
  17. R

    Newbie with 67 U14 Bronco

    Bronco build So I took a few more pictures of my rustbucket. Removed the dummy floor panel patches and the seat. Kinda everywhere I look there is rust. I see and read that there appear to be a ton of different ways to approach these restores. I kinda think that everyone does their own thing. I...
  18. R

    Newbie with 67 U14 Bronco

    Bronco67 Thanks everyone for the quick responses. Looked like the only things coming off the hood was the latch, wiper pisses and the. Will try to get the windshield tie down bracket but it looks a little shot. RVZIO8-)
  19. R

    Newbie with 67 U14 Bronco

    So I sold a 68 vette project and had to deliver it to Va. That gave me room to move the Bronco into the shop. Still have the 71 vette project on the lift but it did allow me to start removing a few things, like the rotted out hood. Took off a few things but was not sure if this light was...
Top