• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. R

    Rims

    Well I told you I was an old fart, more so then I thought. They are 5 lug. Sorry for wasting everyone's time. At 72 aggh! boy an barely count anymore..............................
  2. R

    Rims

    I wonder if it is a 6 bolt rim on a 5 bolt hub and that's why there's only 3 or 4 bolts on.
  3. R

    Rims

    They also look like off set in front and regular in rear. I know I'm an old fart but I best go to the shop and check again.
  4. R

    Rims

    I noticed that my 67 has 6 lug white rims on it. Most of the pictures I see Broncos have 5 lugs. Why do I have a 6 lug pattern. Anyone, is that correct for 67 ?
  5. R

    67 Bronco Build

    Got the newer tires home , cleaned up the hood latch and remove 2 lines from the proportioning block. Not sure what this bracket near the proportioning block is. Anyone
  6. R

    67 Bronco Build

    Found the cross reference to a 7.50 which is a 235/85 x 16. These will work for me to test drive my project 67 instead of the rotted 7.50. Got them on rims for $350. Thanks
  7. R

    Tires

    Thank You, getting a nice set for $350 on rims just to be able to test run the project 67 instead of rotted tires.
  8. R

    Tires

    My 67 project has 7.50 x 16 dry rotted tires. I found 4 new good year tires size 235/70 x 16. Would this size tire be similar to what is on the Bronco now?????
  9. R

    Column to floor

    Well just read a few thoughts and other responses from the forum I think I'll just keep it on the column for now. {plenty of other things to do. Never mind............................
  10. R

    Column to floor

    Wondering if my 67 3spd on the column could be transferred to the floor or is this one of those major projects.
  11. R

    67 Bronco Build

    Well some other parts coming in Monday, like master cylinder and brake lines to proportion block. Also new ignition instead of the screw driver option. Also looking at tires. Currently has dry rotted 7.50 16's. I found a set of Good Year's 235/70 R16. Would this be a similar size tire as what's...
  12. R

    67 Bronco Build

    Okay the tank and fuel pump are in with new gas and bam the 67 started right up and idled really well for a 6 cylinder that has not run in awhile. Ordered a new ignition switch and cylinder as well as a master cylinder and the 2 brake lines to the proportioning block. Then onto seeing what's...
  13. R

    No Gas to front

    Thanks everyone, got it started after priming the pump and the line. Darn thing runs pretty good just idling. Next will be brake master cylinder and it's lines which are no existent.
  14. R

    No Gas to front

    I installed a new tank in my 67 project. Put 2 gallons of gas and installed an aftermarket fuel pump and a new line. Put a little gas down the carb thinking when it started it would sort of prime the line and send fuel up front. No gas coming up front. What am I missing?
  15. R

    67 Bronco Build

    So I have the new tank in with about 3 gallons of gas. No leaks! Before the gas since this is just a test to see how well the motor is I decided to run a new line along side the old one for now. Tried to start and no fuel coming forward yet. Removed the fuel pump and it was toast. New one one...
  16. R

    Starting a build thread

    I probably missed it but where did you get the larg panels for the bed and firewall
  17. R

    67 Bronco Build

    No rubber gasket between tank strap.
  18. R

    67 Bronco Build

    I put the tank in today and it went pretty good. I noticed a little slack on the strap running below the tank. Also noticed that the non bolt end of the strap may need to be going down once it is in the frame not straight in. YES!
  19. R

    67 Bronco Build

    Thanks Paul, good stuff.
  20. R

    67 Bronco Build

    That small setup in the upper left of your picture. Looks like a U shaped small hose. Do they sell that premolded?
Top