• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. wesleydax

    track bar drop bracket or not

    Is the drop bracket failure due to no support on the back side? Could a brace be welded in to strengthen it.
  2. wesleydax

    track bar drop bracket or not

    I wish I had seen this and ask sooner. I just powder coated the axle. Is there a problem using the drop bracket? I don't do much off road
  3. wesleydax

    track bar drop bracket or not

    just finish putting the front end back together after rotating the knuckles. i was looking at the drag link and track bar and maybe there not close enough to perallel. i have a drop bracket for the track bar, do yall think it would be need. ive got a 3 1/2 lift and the delphi box.
  4. wesleydax

    Door post alignment???

    make sure you have good door fitment and go from there. if the door fits the opening you can work the rest from there. ive spent a lot of time reworking new metal. it just dont fit right with out a little persuading.
  5. wesleydax

    Door post alignment???

    its a combination of things. the new metal, where is it made? if it was made from old dies the tolerances are off. did you take mesurements before cuting everything out. its not going to just fit, your gonna need to persuade it to fit. make sure the door fits and go from there.
  6. wesleydax

    Ok to run only the front driveshaft?

    ive used the front one to get home a few times. dont think i would leave out on the front.
  7. wesleydax

    Insurance cancelled

    from what my carrier told me its an added risk most dont want to take. he said they would insure me with an underage driver but the premium would be higher. and since my son is only 12 i didnt ask any prices. i got 4 years to save up for it.
  8. wesleydax

    Insurance cancelled

    Mine is with american modern. there very resonable. i have agreed value on the mustang of 35k and bronco at 18k. its only 300ish a year.
  9. wesleydax

    Questions about 3 1/2 suspensin lifts

    Ive got the duffs kit. progressive front coils and 11 pack leafs with dual shocks. not sure i would go with dual shock set up again but what the heck it looked cool.
  10. wesleydax

    Questions about 3 1/2 suspensin lifts

    I'm running 3 1/2 with no issues. Same drive shaft and all. May need to lengthen brake line. But nothing major had ti be done. And with the new springs it ride better
  11. wesleydax

    front diff oil

    anybody know what oil and how much for the front axle? i need to pick some up tomorrow and aint got a clue how much to get.
  12. wesleydax

    What have you done to your Bronco today?

    front axle going back in after turning the knuckles and powder coating
  13. wesleydax

    on-frame resto questions

    sounds like your not wanting a show truck. doing a restore with the body on will be a challange for sure. a good degreasing with hot water pressure washer and some primer on bare metal and undercoating will go a long way. then spend your money on mechanical dependability, and body.
  14. wesleydax

    hot suspension set up?

    ive got a 2" body and 3.5" suspention, progressive coils and 11 pack springs, dual shocks. It rides better than ever and does well on mild trails.
  15. wesleydax

    What did a 73 cost new?

    my 71 was 3100 ish.
  16. wesleydax

    Popping sound from front end

    with the frontend jacked up try to rock the tire up and down. see if there is any movment. if its not noticable have someone rock it and lay your hand on the knuckle. you may feel it before you see it.
  17. wesleydax

    lift gate stake pocket things

    email sent
  18. wesleydax

    Popping sound from front end

    king pins or ball joints
  19. wesleydax

    lift gate stake pocket things

    Dont know the tech term. what are the brace things called that go in the rear of the top. do any vendors sell them. i cant find mine and need them to install my hydraulic shocks.
  20. wesleydax

    Prime, Base & Clearcoat trim

    not that it matters but isnt the molding stainless. would still need to scuff it.
Top