• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. eds66bronco

    ? What tool cut fiberglass best?

    i second the air saw... i got one of those cheap harbor freight ones for 10 bucks and some fine blades for it and i use it for everything. cuts body panels, fiberglass, plexy glass, aluminum, braided ss hose... you get the idea. i havn't used a hack saw since i've owned it.
  2. eds66bronco

    car 302

    that is the same setup i put in mine. it will do ya fine unless you start messing with hop-ups like cam swaps, etc. it also has a built in rev limiter in the computer (so i've been told) so don't expect it to be tearing up the mud pits. you will want the complete engine harness with all the...
  3. eds66bronco

    Long winter; 435/203/205

    adapter bolts to back of tranny, 6 cyl intermediate housing and transfer case bolt to the adapter. you will love the low gear for control. don't expect to be speed shifting that puppy through town... it shifts like a freightliner:p
  4. eds66bronco

    Aluminum Radiators

    always seems to be the top few rows right where the tubes connect with the tank.
  5. eds66bronco

    Aluminum Radiators

    2 years and 1 month. using it from may-october once or twice a week to work and once every other weekend wheeling. so that would be less than a year if i used it every day.
  6. eds66bronco

    Ron davis rad went bad... so sad

    e-mail sent... thanks
  7. eds66bronco

    Ron davis rad went bad... so sad

    any chance you can post up some shots of how you've got yours mounted. i don't want a repeat of what happened last time and if yours are holding up, i'd like to use your mounting method. again, i still don't see how it is possible for the tubes to have flexed and cracked without the tank/tab...
  8. eds66bronco

    Ron davis rad went bad... so sad

    mad, that looks exactly like mine :o :o :o i'm thinking manufacturing issue at this point. i just can't see the tubes being flexed at the entry point of the tank given the design of the upper chanel and tab area. that would need to flex and crack before the tube area would be able to start...
  9. eds66bronco

    Ron davis rad went bad... so sad

    i'm thinking rubber mounts in a frame that mounts with more rubber mounts to the core support. yup, sucks to be me:p
  10. eds66bronco

    Ron davis rad went bad... so sad

    so here's the update. they tried to epoxy it and it didn't hold. so now i'm out the original $400 for the rad, $20 for the poly bushings, and $22 bucks to ship it back to RD. man this sucks. they offered me level 2 dealer cost but after explaining that nowhere in the literature that came with it...
  11. eds66bronco

    Relay Experts, What do you think? (goofy anti-theft)

    we used to pull this in college when we wanted to bust someone's balls. aligator clip from the headlight or brake light to the horn. never thought about doing it to my own rig as a theft deterrent. i like it!
  12. eds66bronco

    EFI problem/ stuttering stalling

    i used a left over piece of ss boiler vent tubing after i redid my boiler. it's kind of pricey but is the perfect diameter. also, make sure the engine harness has good ground at the big connector for the injectors. i also had a couple stuck injectors that caused a few frustrating moments. get a...
  13. eds66bronco

    Ron davis rad went bad... so sad

    well, it's off on the big brown truck to the rehab center at RD. i miss it already:) took out the extra insurance too. maybe they will destroy it on the way and i can get a new one ;)
  14. eds66bronco

    Ron davis rad went bad... so sad

    karl, i hope the thread doesn't come across as a bash on the RD guys. the reason i went with them was only after doing lots of research on what the best one was. everything clearly pointed to (and still does) Ron Davis. i'm only put off by the fact that it was never stated in any liturature/site...
  15. eds66bronco

    Ron davis rad went bad... so sad

    i may need to build a better flexing attachment system. i realize now how rigid the poly is. i initially justified the cost of the RD with the wife as "buy quality and spend a bit more now to save in the long run". as much as i would like to get a new one as suggested by others above, the only...
  16. eds66bronco

    Ron davis rad went bad... so sad

    well, just got off the phone with the tech guy at RD and he said they may be able to epoxy the tanks. if not, he offered me dealer cost for a replacement. according to him, the problem is the poly mounts. he said they need to be replaced with rubber and that the poly ones put way too much stress...
  17. eds66bronco

    Ron davis rad went bad... so sad

    well after only being in the bronco for 3 years, the upper 4-5 rows of tubes on the passenger side and the upper 2-3 on the drivers side have begun to crack at the joint where the tubes enter the tank. i drove home from work and when i got there, i could hear a slight hissing sound and coolant...
  18. eds66bronco

    Which Master Cylinder resivior supplies back brakes?

    tofic, i think he is using a drum/drum setup so the mc he has should be ok. i'd second the drop lines and/or flex lines to the front brakes as a possible source. my old stock rubber lines started to baloon and a switch to braided ss lines made a big difference.
  19. eds66bronco

    Dana 44 axles and u-joint-HELP

    not that i know if it is a good idea or not, but the guy at last year's tough truck challenge had the yukons in his and he was tack welding the cap to the axle in 3 spots on each cap. he said it kept the ears from spreading on the axle. he had a spare set ready to drop in for each side. not sure...
  20. eds66bronco

    Best Power Steering Fluid For Saginaw

    just don't do what i did and top it off with what you think is the half bottle of valvoline synpower and realize after you start pouring that it was the leftover dot 3 from the brake bleeding job you just did... not that anyone would be that stupid... cough, cough, mutter bad words.. :( even...
Top