• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. eds66bronco

    88 Crown Vic 5.0 swap

    you will be happy with it once it gets up and running. get the probst ford fuel injection book and the helms manual for the crown vic and you will be good to go. i had to rotate the upper intake 180 to clear the brake M/C. this will force you to extend some of the wires (egr, tps, water lines...
  2. eds66bronco

    Bring Your Own Bronco-BYOB New England

    i'ts more of a "in my dreams" sorta wish. that's a good price but i need one more in the "free" catagory. home improvements sucked the life out of the bronco fund this year... spent 6,000 on a new septic mound instead. :p
  3. eds66bronco

    Bring Your Own Bronco-BYOB New England

    well, can't talk the wife and kids and dog ( actually the dog would have gone for it) into a 4 hour/two tanks of gas ride with swamper buzz but i'll be there with the wife's exploder. man, i need a trailer:mad: hope to meet up with you all on sunday
  4. eds66bronco

    PS cooler - what else might work?

    lots of the mid 90's ford vans have nice stacked plate type oil coolers. i got mine for a couple bucks at the pull-it yard
  5. eds66bronco

    68 six cyl motor mounts

    do you need the rubber mount or the towers that weld to the frame? if you need the towers, i still have the ones i cut off when i put in the 5.0
  6. eds66bronco

    fuel line

    my whole setup is 3/8 braided line. it won't be a problem
  7. eds66bronco

    Brake fluid in PS Pump

    get it out asap and flush with new atf or power steering fluid. it will swell seals if left in for too long. keep it running and disconnect the return/s and dump into a bucket as you fill the res with new fluid. make sure to pump the brakes and turn the wheel lock to lock several times to purg...
  8. eds66bronco

    Best way to paint a rollbar?

    i've had great luck with the ppg epoxy primer. it has a satin finish and several coats hold up really well. the front legs of the cage that get rubbed every time i get in or out still look like when i sprayed them. i degreased the tubing, etch primed with SEM primer and then shot two thick coats...
  9. eds66bronco

    Aeroquip hoses

    those hoses also need to have the fittings clocked in the right direction. some of the hp fittings are not the swivel type and the hp hose doesn't twist easily. it took me quite a few tries to get my fittings facing the right way as they twist out of alignment as you tighten the fitting sleeves...
  10. eds66bronco

    NOS bronco tailgate

    i thought they came from the factory with rust on the bottom edge ;)
  11. eds66bronco

    Is this bad? Crack in Frame

    that almost looks like someone went at it with a small cutting torch. looks like slag puddles formed as it was cut sitting upside down. at least you have metal in that section to weld... unlike my plow bronco
  12. eds66bronco

    15x10's or 15x8's for 36" TSL RADIALS>> Pics Needed!!!

    z70, here are some other shots. i don't have any straight on shots other than the one i posted above but these 3/4 shots show them pretty good
  13. eds66bronco

    Smitty roll bar fit

    Sturube, the side rail tab was not welded in the correct spot on that side. had the exact same problem when i got mine. called and smitty said they had never heard of the problem before... right. grind that one off and relocate it in the propper place and have it rewelded in the correct spot...
  14. eds66bronco

    Bring Your Own Bronco-BYOB New England

    ok, as of now i am planning on being down there for this with or without the bronco so count me and my wife in plus 2 kids. look forward to meeting up with y'all.
  15. eds66bronco

    Just installed hydroboost messed up power steering

    the first pic really looks like the high pressure line from the pump is going into the port nearest the return nipple that goes back to the resevoir. this port should be the line that goes to the steering box. the largest opening/port (the one by itself) is the hp in from the pump.
  16. eds66bronco

    15x10's or 15x8's for 36" TSL RADIALS>> Pics Needed!!!

    here are the 36's on 15x8's i can run them at 10psi without loosing a bead. not sure how a 10' would hold at lower psi.
  17. eds66bronco

    Bronco tub in the woods

    if it is an early one, the tag would have been on the inner driver kick panel. wow, no rust in the quarter seams. nice find!
  18. eds66bronco

    Saginaw pump leaking, ready for new rubbers

    just watch out for the vanes when you pull the shaft. they will drop out if you don't grab ahold of them as you pull. you can slip a rubberband aroud them to keep them seated. ask me how i know:cry:
  19. eds66bronco

    Just installed hydroboost messed up power steering

    i can't tell real well from the pic but it looks like the hp line from the pump is going to the wrong port on the hb unit. the high pressure line should go to the port that is all by itself. the side with 2 ports should go to the steering box and the barbed fitting is the return to the pump...
  20. eds66bronco

    Best place to buy Durabak ?

    i talked to the rep at cote-L industries a few years back (they manufacture the durabak) and he said they also produce the hurculiner. i assume the black durabak is the same stuff as the herculiner. i've seen the herc in wally world and at autozone on sale for about 60 bucks/gal. i paid about 90...
Top