• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. eds66bronco

    efi swap troubles

    EB, make sure those injectors are firing. if you got ones that were sitting, there will be a few that will stick. take a long wooden dowel and place one end on the injector, the other end to your ear. you should hear a good solid snapping sound from the injector. you will hear the difference...
  2. eds66bronco

    Removing front knuckles

    yep, what flash said. if you try and remove the spanner nut first, you will bust the spanner socket. once you get the disk/hub assembly off, you will see the nuts to remove the spindle from the knuckle. i had to use a block of wood and a sledge hammer to get the spindle off the knuckle. once all...
  3. eds66bronco

    Brazing

    Yep, thems is the critters! they last longer than the solid wheels too
  4. eds66bronco

    I want to make gas tank

    Glad you guys are getting some use out of these plans. i had drafted them up based off some plans i had seen but the site i got them from vanished so i don't know where to give credit. my original plan was to bend up the bottom out of 3/16 or 1/4 and do the sides out of 1/8. i have the bottom...
  5. eds66bronco

    EFI flooding sometimes on startup...randomly

    i used the same place for my injectors. really nice guy and way cheaper than all new injectors. i had only 4 injectors working and the other 4 were way below spec. all injectors came back within factory spec.
  6. eds66bronco

    Brazing

    do yourself a huge favor and get a flap wheel sanding disk for your grinder. they look like overlapped pieces of sand paper formed into a grinding wheel shape. they don't gouge the metal and leave a nice smooth finish. nice job by the way. i do think the mig will heat way less area if you used a...
  7. eds66bronco

    Time for 435

    ditto on the axle upgrades and the centerforce df. i love that clutch!!
  8. eds66bronco

    what to do

    you gotta be honest with your abilities... it is pretty straight forward but you need to do your homework. if you can get all the harness/relays/sensors from the donor and know everything works before you take it apart, that can be a big help. you will also need to get the probst fuel injection...
  9. eds66bronco

    Disc/Drum Prop Valve

    running corvette disc/disc m/c and astro hydroboost with discs on both ends. kept the drum/drum prop valve to keep the warning light but i can't get it to center so i've unplugged it (if i did it again, i wouldn't have bothered with it). i put a wildwood adjustable valve in the rear line but it...
  10. eds66bronco

    square tube frontend...

    oh now that is a sweet setup. the number of times i wish i had removable body panels matches the number of dents in my rig%) nice job
  11. eds66bronco

    Shocks

    yup, it could increase the amount a little but if you've busted two joints already, i'd venture to guess that something else is up with the rearend. i'd start with checking the pinion angle.
  12. eds66bronco

    Oil pan spacers

    if they are what i think they are, they go under the pan bolts to help even the torque on the gasket. the ones i'm thinking of follow the contour of the pan lip along each side of the pan.
  13. eds66bronco

    Can't HOLD!! Need Brake!

    if ya do a search on here for hydroboost, myself and lots of others have posted up their info. i got mine out of an all wheel drive astro van for $10 from my local pull-it yard. hardest part of the whole project was getting the hood of the van open with a busted cable and removing the nuts from...
  14. eds66bronco

    bleeding new system

    you may also get some pedal backfeed while purging the air out. it will go away but feels very weird. mine puked on the floor as well. put a pan under it just in case.
  15. eds66bronco

    remove bolts from door post

    that's the only way to remove anything up here in the rust belt.
  16. eds66bronco

    Shocks

    i noticed a huge difference going from two on each corner to singles in the rear. i'm running the duff shocks. i'm currently using a home brew inboard rear mount (like the Cross ent. setup) with singles in the back. the back was bone jarring with the stock type rear mounts and duals. removing...
  17. eds66bronco

    Dana 44 question I know someone most have this

    http://www.broncohq.com/pdf/66-77/chassis/dana44.pdf 78 is the same... just has longer tubes
  18. eds66bronco

    Help - Broken Head Bolt

    just remember those reverse bits are hardened and they always break off in the hole (at least every time i've tried to use one). then it's a real pia to get out. i now use a center punch in the hole and drill out the stud (start with a small bit and work your way up in size to just shy of the...
  19. eds66bronco

    Chevy Disc Swap - Done, Astro Hydroboost - Done

    you can make an angled bracket like i did.. search my posts under hydroboost. or you can open up the hole in the firewall and slide the whole thing over enough to clear. i did one install where i bolted it to a plate and then bolted the plate to the firewall using the pedal assembly bolts. this...
  20. eds66bronco

    Painting Bumper/Cage

    i would recommend getting parts like that powder coated if it's more for show... not that powder coating isn't good for trail use, but if you do trails like the ones up here in the northeast, your bumper will take alot of hits and scrapes. once you open powder coat to the elements, it starts...
Top