Search results

OK Bronco folks, My dilemma has been solved. Found this advertised in town here. 1976 Bronco Dana 44 with radius arms fully rebuilt with Yukon axles, Yukon Super Joints, Yukon Spool, Yukon 5:13 gears, 3/8 thick diff cover, new ball joinst and brakes and rotors, all new seals. Wild Horse 4...

Looks like I will pass on these 18" long springs. My rig will have an old PTO winch and heavy plated bumper. I wonder if I need some heavier spings then a 3.5 advertised in the catalogs. Maybe purchase a 5" lift springs? Are this heavy Moog cc 816 factory Ford springs? F150 Srings? I am looking...

Thanks for the help!!!! I will see if that guy still has the front end. Thanks

Hello I am looking at a set of EB springs that measure 18" long sitting on the shop floor. Does any body know what lift these might be? the guy thinks they are 2.5? but says may be 3.5? Not sure of manufacture of springs? Thank you!!!!!

Hi Folks, Got a question. I have a 1969 Bronco with a Dana 30 with drums. I have a line a on Dana 44 with disks out of a 76 F150 (Guy wants 50 bucks for it). Can I use the disks on the old Dana 30? If not. If I purchased an Early Bronco Dana 44 with drums, Could I used the disk brakes from...

http://s1306.beta.photobucket.com/user/qexe158/media/Frontend_zps2143f35d.jpg.html#/user/qexe158/media/Frontend_zps2143f35d.jpg.html?&_suid=1350006578042046896754342150304 Here is link to a picture of the front end. A bad picture taken with a flash light and phone. Sorry not sure how to post a...

Just seen the truck believe it to be a 77. Has a 351m in it. The front end looked to be a Dana 44 and the pinion was high in the casting. It has disks but one side has a big hub and the other side is small.

Thanks again guys.

Thanks guys! My buddy is asking what is a big hub Dana 44 and transfer cases/trans are worth? Wants to know if they are worth cutting out or send it to the scrap yard with the rest of the truck? I really appreciate the help.

My buddy got a free truck. He wants the engine. I have not seen it yet but he described it as 1975 4x4 3/4 ton and says the truck sits up tall and has BIG front hubs. Could this be a Dana 60 or 70 front end. and factory high boy? What transfer case would this have? Should i grab the transfer...

Thanks everybody. I am a couple months away from making that choice. Some of Your advice have given me some confidence that the original harness is usable if I don't find bad spots or hacked wires. Thank you

Purchased a 69 Bronco it sat in a field where for 20 years. Mice, roaches and spiders called it their home. When I got the rig home I threw a batt in it the starter worked and I pulled the light switch and one taillight worked. Then I stared fixing rust. Now the Dash is out and the harness is...

Thanks guys. Laws are relaxed here. All good info.

I am working on a 69 Bronco. Going to finish the front half of the cage and want to know if I can ditch the wipers arms and motor? I have never driven a bronco in the rain and want to know if Rain X will work? It seems like a funny question but my dad has a old Ford Hot Rod and Rain X does not...

Thanks for the info

Thanks, Thats is a thought. I am planning on 1 3/4 tubing. When I get the money my plan is to buy a bender from speedway motors in Lincoln Ne. At my old job I had done some cages in road race cars and drag cars and I am excited about the idea to be able to pull the whole thing out of the truck...

Thanks Cut off wheel for all the cuts and the First "ruff" grinding of the welds Then I used this wheel on my 4" grinder. Not sure what you call it but in handled the "final" grinding like a champ.

Thanks Bet yours looks good too.

Mouse poop was about 1/4" thick on the back bottom edge of dash. I thought all the wires would have been a chewed mess. But have not found any nibble marks yet. Yet! Saved old inspection door from my old house furnace. Budget build!

Took my dash out to paint and clean all the poop from behind. (Bronco sat in a field for 20 years) I thought I would make provisions for future "A" posts. Dash will be painted white.