• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. JTex_4

    Motorcraft carb (newbie)

    Alright, thanks again guys! So I’ll take the idle stop off for now. Also, I’ll try to re-tap the thread for the fuel filter and see if that will hold for a while at least. How necessary is the carb spacer? Could I get away without it while I’m just piddling with it in the garage? I hear that if...
  2. JTex_4

    Motorcraft carb (newbie)

    Ok so I have almost everything back together.. I have found that there was a idle stop solenoid plugged in and laying up under the carb.. I have done some research and figured out how and where it mounts. But getting it tuned in with the other adjustments will be something else. I have also...
  3. JTex_4

    Stock suspension/ uncut fenders tire size

    Like the title says.. on stock suspension and uncut fenders, whats the biggest tire that will fit nicely for street driving? I have 30x9.5r15 now but want some meat.. post your pics!
  4. JTex_4

    Motorcraft carb (newbie)

    Update: I got the carb tore apart today so I’ll be soaking it tomorrow and then the fun starts..
  5. JTex_4

    Motorcraft carb (newbie)

    Byson1, So I looked into the carb while twisting the throttle arm and gas is shooting into the carb but only on the passenger side. Is this right? I got her to idle today while warm but something is still slightly off.. just doesn’t sound perfect. I put an inline filter before the fuel pump and...
  6. JTex_4

    Motorcraft carb (newbie)

    B Rron co What’s wrong with a rubber fuel line??
  7. JTex_4

    Motorcraft carb (newbie)

    Wow, thanks guys! Lots of helpful info in a short amount of time. I appreciate all your tips! I’ll keep y’all updated as I figure things out.
  8. JTex_4

    Motorcraft carb (newbie)

    Thanks Paul, I pretty much just used compressed air to clean the filter and pump.. I will most likely just replace the pump and filter but I am in the very early stages so I’m just trying to get it to idle with what I’ve got right this second. As far as the truck last running... it had 07 tags...
  9. JTex_4

    Motorcraft carb (newbie)

    Thanks broncodriver99 I’ll have to read that one. I’ve got a rebuild kit for the carb, I just haven’t dove that deep just yet. I’ll add it’s a 302 auto and had been sitting 5-10 years. . My dad will be a big help with this one but it’s been 15 years or so since hes piddled with one.
  10. JTex_4

    Motorcraft carb (newbie)

    I’m new so excuse my forum etiquette! I bought a 74 ranger a couple months ago. I had a 74 as my fist ride that me and mostly my dad rebuilt. So I’ve always wanted another one. I’ll try to make this short and sweet. I started with pulling tanks and all fuel lines. I recently got the main rear...
Top