Search results

PS box is mounted on the outside frame rail.. I also just noticed the front end isn't centered, the axle sits out about an inch further on the drivers side. I don't have an adjustable trac bar. The box movement seems to happen only when I break the wheels L/R from their center position...

nope, it's just a frame reinforcement plate like Chuck sells.

the lower housing on my F150 PS box (about an 1-2 inches above the pitman arm ) moves when i turn the wheels with the truck parked. The creaking noise is not from the pump, but from the lower housing as it's flexing. The frame has a reinforced plate attached. The steering geometry is secure...

for the 9 inch rear, will the 9pints (4.5 qtrs) of fluid fill up to the filler plug. I just checked the rear after it came back from the shop and i can see the fluid line at the fill hole. thx

On the 6 series MSD u can easily install a theft deterrent kill switch If u use the white wire to trigger the MSD, install a switch across the magnetic pickup violet wire to ground. When the that wire is grounded, the vehicle will crank but not start. If u use the mag pickup to trigger the...

date, place, time?

Generally, manufactures are not set up for good customer service to the end customer ( that's us) They focus their efforts on their core competency which is mass production. DC could cut out all the distis and sell direct to us, but costs would be higher due to the amount of customer service ...

my pics are in the member gallery, i run 33x10.5 BFGs

can't post pic.. email me at tonyf3@hotmail.com and i'll send u a pic

I've got BFG ATs @ 33x10.5 on 15x8 Rims. I think they ride alot better than it did w/ the 33x12.5. I've got more control over the vehicle and turning is easier too. If you're worried that they don't look wide enough on the truck buy the wheel spacers from Chuck, they are 1/4 and you can see a...

The po had manual windshield wiper set up. A spring was mounted in the cab w/ a pulley system and rope attached to the windsheild wipers. You pushed down w/ your left foot on a pedal that was installed to operate the windshield wipers. Last, piece of chewed chewing gum was used to plug a hole...

My MSD instructions state I can add a kill switch by grounding one of the wires (the white one). I’d like to add a series of switches (probably 3) off the wire so that they all need to be switched in order to start the vehicle. The instructions say the wire needs to be grounded. Can you add a...

My godson was playing in the glovebox last night and pulled out the ignition fuse. I went to turn the engine over, it tried to start, (made it about 2 seconds) Now the engine won’t even turn over. I tried to turn it over a few more times and got one click, now I’m getting nothing. The lights...