Search results

If I could only do this someday. Looking through the top of the windshield is annoying as hell. I've got random aftermarket seats more or less sitting directly on the floor and I'm still too high up.

Out of curiosity, about how many miles on the kit do you think?

I'm running stock arms. I've owned the truck for 25 years. I replaced the front end bushings (including the Cs) long ago and had it aligned. But I can't remember if they were stock replacements or geared for the 2.5" suspension lift I have.

I'm going to check that out. I'm only going to be 3.5" up overall so my geometry may not be that adversely affected but somewhere down the road I may get a proper suspension lift. Thanks!

Should've mentioned I'm running 4.11s. And you wouldn't think of it looking at her but here lately she's been 90% street, 10% offroad. Though I am looking to get out in the woods more. Definitely not a trailer queen.

Awesome, thanks all! AZ that's how I hope mine will look. If you notice in my pics, whomever did the flares/fender cut, IMHO cut could have gone further toward the rocker, in the rear and likewise in the front. I can always do that if I have to. Apogee, yeah, those have been beat up for a good...

Currently have 33 x 12.50s on 15" wagons (see pics for current clearance) with an older Duff's 2.5" suspension lift and original body mounts. Was wondering if I do the WH 1" body lift (with new mounts) that I have here in the garage if could I fit 35s? Thanks! Sent from my Pixel 4 XL using...

Interesting. So on mine if the taillight works and the flasher works then what could it be? These are the led boards from Tom's. They were working after install. Sent from my Pixel 4 XL using Tapatalk

This is something that im chasing as well. My taillights and blinkers work but for some reason my driver's brake light isn't working. I'll be looking to the bucket ground I guess. Sent from my Pixel 4 XL using Tapatalk

One method I've seen but not tried is to use a heat gun to soften the stripping to where it's more pliable and then close the door and leave it sit for a couple of days. Sent from my Pixel 4 XL using Tapatalk

Got it. Used an extendable magnet to push it up, then I hooked an allen wrench into it to hold it while I got a bolt started. Sent from my Pixel 4 XL using Tapatalk

Thanks guys. I've got a quick release hing set en route from Tom's. I plan on trying to fish it back up today. My other fun issue is on the passenger side where the top backing plate has one bolt in it and two snapped off bolts that I'll have to drill out. Fun. Sent from my Pixel 4 XL using...

So I checked and the front and back of both A pillars are solid. There's holes at the bottom. Is that rot or were they there to let any water drip out? Regardless, on the driver's side if I stick my finger up from the bottom I can feel the plate. I might be able to push it up while trying to...

Ah. I figured all of the adjustability would be on the outside but it makes sense. Sent from my Pixel 4 XL using Tapatalk

Nice, Yooper. No point in cutting out that decent metal. For something the factory didn't consider to be a serviceable item they should have been tacked in at minimum. Sent from my Pixel 4 XL using Tapatalk

Interesting. So for mine to have fallen down, at minimum, that bottom shelf must be gone. Sent from my Pixel 4 XL using Tapatalk

Ah, got it. I'm going to peek behind the fender and see what kind of rot I have. I'm assuming the tab the holds these in place rusted off. Sent from my Pixel 4 XL using Tapatalk

I was gonna see if I had one or a wire coat hanger. I assume the little pockets that hold these plates in place are visible if the fender is removed? Not that I really want to do that. I'd probably try welding the lower hinge bracket on before doing that. Though welding it on would not allow...

73' Bronco. I've had the top and the doors off for 3 or 4 years now. (even through winters). Decided I wanted to put everything back on this winter and forgot about this little issue. (Got the top back on today) When I initially removed the doors, I put the body side hinge bolts back in so I...

Update.... I found my issue. It's not the relays. As suggested I turned the high beams on and pulled each relay until they went off. Swapped them and the hi beams stayed on regardless of which relay I used. Plus with the hi beams off and the light button all the way out/on when I plugged either...