Search results

Can I "cut and Paste" that and put it on the Facebook BroncoG6 site, (with my tasteful comment too)?

This really BLOWS! I'm on the 18th month! The crap line of "Your special to us, you must have a reservation in order to get one", Now seeing more and more on dealer lots that are not "reserved". That and People walking in and ordering one and theirs "Just show up" within a month or...

I like your idea!

Yep, got your E-Mail, Thank You, but nothing matches the profile needed, going to get a bench mill. Once I make sure the table is perpendicular to the head column, I can run a 3/16 end mill down the length twice for the glass runners and flip it and cut the tab for the rubber groove...

Cutting from 1" x 3/4" bar stock, Extrusions can be found with 2 groves on top, but the key is the bottom tab (that fits in the rubber gasket where the glass edge would go). I need to invest in a milling machine. Really hoping some purchase's here can help with my ROI. I cut this on my table saw...

Aluminum side rail cut.

I'm running 10.5's ...12.5 are way too wide for me and your slinging alot of "tire mass" every day ..

What about a good old-fashioned "bug deflector?"

pained black, Not glossy Black, ...

What do you mean be "dark moldings? Frame will be made from Aluminum stock, So the bare AL stock is "silver" in color. is that what your looking for? Planning on painting them a "satin flack finish" (like the aftermarket ones)

Id like to know how many (if any) are out there and interested in this? Looking into invest in a milling machine Instead of beg/borrowing, Looking at a rough ROI (return on investment)

That is the plan, to fit in the stock-style rubber gasket...

Here's a photo of my mock-up of the slider frame set-up, PT wood first to get correct angles and measurements. Thank you mpboxer, could you take some close-ups of the latch? with the glass closed and with the glass open about 2"? thanks

Thanks guys, I have a '73 and also spare side glass, and for now, I want to experiment with making the extrusion "profile" and test for feasability to make it "weatherproof" so lots of photos or a loaner, ( thats how I made the dies for the Door vent shades) Thanks Ron

Sorry wrong forum, please delete...

one step at a time, need photos and/or a "loaner"

Looking for some detailed photos, Maybe a shot or two without being mounted to the rubber gasket? different angles ect. The new ones from Tom's are too 2021 Ranger-ish for me. I currently make the Door vent shades, "Delux Package" decals, and the key chain chip-protector, I also make body...

Looking to make the sliders for the E. I already make the door-vent shades, The "delux" package decals, and Bronco Key-chipping protectors. The '86 Flareside bumper brackets, license plate holder, The '48-'52 F-series cab corners, and fender patches. Could use some detailed photos of the...

Should not use the stock Carrier with larger tires. The only thing holding the carrier to the truck body are a few sheet metal spot welds holding the brake light corner to the rear quarter...

Yea, Yea, Yea, tell me about more high end crap, that 's coming, Still waiting an my street truck ... Come on FORD concentrate on already made commitments...