Search results

I added LED light strips with a self adhesive back. You can cut them to whatever length you need and just stick them to the bottom edge of the dash. I wired them in to a wire that was already under there that is controlled by the headlight switch.

So what ratio are you shooting for?

That turned out cool.

Looks great, love the color matched liner.

They came from the factory on my 05 F250, they last forever and ride nice but have no traction at all, not even on wet pavement.

I used Red Kote in my 42 Ford 9N tank about 10 years ago and it has held up fine with no flaking.

That would do it, ;D Glad it was an easy fix.

I think for a Bronco, any trailer over 2000lbs loaded, you should have trailer brakes on it.

Sure sounds like the transfer case jumped out of gear to me. You need to twin stick it.

That's what I would do, I already have a body lift and a scoop and like the look. ;D If you don't like the look of a scoop, the BCB adapter and a Mustang upper is your cheapest option.

I'd buy it if you were closer, they are awesome winches. We have one on my sons F150 and I've had them on several Broncos. They are really strong and really fast.

I don't know if this is normal but ever since I replaced my gasket and windshield it has leaked BAD between the glass and gasket. I wish I had put some sort of sealer in the gasket before I wrapped it around the glass.

Sounds interesting, can't wait to see how it turns out.

Yep, that's a 351W.

I just noticed the one engine picture you already posted on page 2, That looks like a 351W, a little better picture and we can tell you for sure.

If you can post some good pictures of the front and top of the engine it will be easy to tell the difference between a 302 and 351W.

X2, You have loose wheel bearings for sure but that tie rod end has a good bit of play also.

Sounds and looks awesome.

When I put Chromoly axles in my 77 I was able to get the outer axle snap ring on no problem and I have Mile Marker hub also but they are not necessary. My axles came from Tom's Bronco parts, which axles did you get?

Very cool story, thanks for sharing.