Search results

Seems like once a week or more I see a new one parted or wrecked. How may do we think are left??

90% tread. Great shape

Free tire, great tread Load range E. Might be good for a spare for a tow rig.

Not having much luck finding a cheap junked up fiberglass hood to narrow. No way I'm buying a new one just to cut it up. So I'm thinking of narrowing a steel one (I have 4 or so extras). Remove all the supports and cut a big hole for a fiberglass scoop. Figure that might be close to the...

Running 200ish @ idle in 70 degree temps. The other day was idling close to 210. Can hear it bubbling after I shut it down. All done within the past year...... Motor was torn apart and re-gasketed (including head gasket) due to really loose timing chain. Parted a 76 auto, so I kept (and...

an EMP blast??

Does not have to be in great shape and the taller, the better.

78 full width, high pinion dana 44 housing with 4.10 gears. No axle shafts or spindles and out.

No shipping, has some tread. Good for spare maybe.......

74 Dana 44 with 4.10 gears (open) and chevy disk conversion. Corrosion on some of the gear teeth, rest of the inside looks OK. Chevy conversion is 6 lug (don't ask me??? %)).

Brand new Pics here http://luxjo.supermotors.net/FOR%20SALE/39.5%20X%2015%20X%2016.5%20NEW%20SWAMPER/DCP04911.jpg http://luxjo.supermotors.net/FOR%20SALE/39.5%20X%2015%20X%2016.5%20NEW%20SWAMPER/DCP04912.JPG Sorry, can not ship.

Working on my front 4 link, looking for pics of EB's that have done a front 4 link. With mogs would be a plus. ;D

I have access and permission to bring 1 or 2 rigs up to a wheelin spot in North Jersey. Looking for 1 or 2 decently built rigs rigs (prefer minimum 35's, lockers and a winch) that want to wheel some pretty good terrain (and help get my butt out of a jam if needed ;D). Have room for 2...

3 doors for sale. No shipping 1. Very decent overall, best of the bunch. Has bondo on the skin. 80$

Got this with my bronc, not sure if it may be better made than all the chinese junk these days.

The Ancient Build Thread (was Project BEEF....) Pics Inside How do you know your build is taking forever, it gets relegated to the ARCHIVES......... UGH!!!!:o http://classicbroncos.com/forums/showthread.php?t=114372&highlight=beef So I have so old updates......... Getting back down to the...

What's available? Found a forged 1350 yoke on E-bay. http://cgi.ebay.com/ebaymotors/FORD-9-1350-FORGED-STEEL-PINION-YOKE-28-SPLINES-NEW_W0QQitemZ250492413073QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item3a5282e491 Went to Jesse's (high angle) and don't see a 9" flat flange...

Approx what lift? Assume front narrowing, substantial hacking, and pushing axles 8-10 inches outward (WB in 110 range). Going full hydro with no track bar in front. More interested in the front, as the rear will be at least partly back-halved.

Sweet!!!, thats more like advertised 430-440 vs fords 412. The 412 may be on reg gas?? http://blogs.insideline.com/straightline/2010/03/inside-line-dyno-tests-the-2011-ford-mustang-gt-50.html

Couldn't let all this snow go to waste, so I dragged the street EB out in the pines (Yes, I wheeled it, even though I said I never would, it's all Bills fault %)). Nice thing about a snow run is it's much harder to break (although I saw the high side of 5500 quite a few times) and the thing ends...