Search results

So I'm getting juiced up on this idea of rotating my C's. Lot cheaper than the other options, even the 200$ duff radius arm drops. I did build a 3.5 inch riser, obviously @ the perfect angle (vertically). For those that did this, and rotated the diff back the other way, how far did you go if...

Spring coming soon and I want to get some serious caster in my street rig. It wanders all over with 33's AP's, 3.5 lift, 7 degree bushings, all new chevy tie rod steering setup (remanned 1/2 ton box), and drag link/track bar perfectly in alignment. Caster is the only thing I think I really have...

Trying to find one of these, tired of trying to rip my arms off getting belts tight. I searched on both the titles up there and got nothing on both. Anyone have a source.

Those that are using coil overs or air shocks with full size axles. What angle side to side are you running them at (front and rear)? I am going to order a set of ORI struts and one of the questions to order them is what angle I will be running them at. I am using as much of the stock frame as...

SOLD!! ONE New 38 X 12.5 X 16.5 Swamper/stock steel wheel (8 lug) Brand new swamper on stock steelie Great for spare...... 140$ no shipping pics http://luxjo.supermotors.net/FOR%20SALE/38%20X%2012.5%20X%2016.5%20NEW%20SWAMPER/

One of the broncs I bought a couple years ago has an EB D44 front, but chevy 6 lug disk conversion. Do I just need hubs/rotors to convert to 5 lug or do I need spindles too? Can I use 78/79 ford 1/2 ton stuff for that?

ARGGG........................... Is it just me, or does everything you own have at least one leak (no matter how minor). Went for a short morning drive in the 70 and got on it a bit in 3rd gear (woohoo, took up to maybe 4500 RPM, really hammering her %)) and then suddenly this huge puff of...

I have 7 degree bushings with 3.5 lift. Want more castor and have no need for different or extended arms. Anyone heated and bent stock radius arms. and where on the radius arm did you bend it?

Have a 79 bronco tilt auto steering wheel. In good condition. Will get pics ASAP. Price is + shipping

than this........ http://www.partsmike.com/store/store.php?crn=204&rn=1333&action=show_detail or this with .188 wall DOM tubing http://www.partsmike.com/store/store.php?crn=204&rn=1332&action=show_detail I can borrow the taps for free from a buddy that did it (and buy my own tube), but he...

The rod between the hydroboost and the MC. Need to cut down the one I have that is from the vac booster. The HB internal piston can be pushed all the way in either direction (70's lincoln). Should I push it all the way "back", as in the positon it would be in if the brake pedal is all the...

78 460, runs strong C6 shifts good TC and rears OK Brand new L & L fenderwells/motor mounts Edebr performer RPM manifold Edebr 750 carb Alum fin valve covers Newer factory "Supercool" radiator 4" lift Stock axles, open front/LS rear Dual opening sunroof Smittybuilt roll bar Slider rear windows...

Will a 79 F350 2WD master (the master used for upgrades over 1/2 ton and 4WD Ff350's in 78/79) and/or 86 mustang SVO master fit (which is 1-1/8 bore and alum to boot)?

4 doors for sale. No shipping 1. Very decent overall, best of the bunch. Has some bondo on the skin. 80$

With all the rain we get, decided just a bikini top was not going to cut it. Did not want to give up the open air-ness and look of the bikini, so I decided to build a top around it. Actually, it all started with just wanting some windshield supports. Of course they had to be stainless to...

Looking for crappy, but intact rear interior panels. Or if someone is local and I could borrow set for a couple days. I want to make a continuous interior panel that runs from the TG to the front edge of rear section of fiberglass door inserts. Would like to use the stock panels (for...

the last couple nights........ Hope this fixes some of my squirreliness...... I'm definately interested in getting more caster after reading how little there is stock. Thinking of just bending the stock arms, as this is just a street truck and I don't want long arms.

See pic............... Can bring to roundup @ gore.

Full set of soft doors. Pretty nice shape. Windows clear. 100$ Full length headers, structurally sound. One small pinhole near collectors. 40$

When I was in Coscto yesterday looking for that rear storage box, I wandered into the automotive section thinking maybe the box might have been in there. I noticed they had huge rack of Gorilla lug nuts. Had some 1/2" one's so just for kicks I asked ther guy how much. He says .48 cents each. :o...