Search results

Thinking of mouting this in the back to have some larger lockable storage. Wondering if it will fit with a folding jeep type rear seat and what other options any have come up with. http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=97012

Some free stuff.

Bought a spare portal box several years ago, but one of the ears (that normally holds the pivot for the brake shoe) was busted off. Got a couple of portal box cases from aguy who upgraded to the aftermarket cases they make now, so decided it was time to tear down my spare since that broken ear...

Ugly, but small dia wheel and good for a trail rig. Paint it black or get a steering wheel cover for it. :p (I cut the steering shaft just to get it off, all interanl parts should be in there and it even has the horn kit). BTW, will also trade for a stock horn (or pair if you have them)

Looking for good running 302 for buddies 68 stang. Will spend up to a grand for the right deal, but looking for less. Stock 302 is fine, has to be relatively local to central NJ.

The only thing I am missing for a complete install is the auto column and linkage between col and trans. Whats included (all from a 76); C4 and adapter (have not personally run it, was told it shifts fine) Stock converter Auto flywheel Flex plate Insp plate Factory trans lines (with good...

Isn't this one of the problems with the stock M-blocks/400's. Seems like a deck height and/or squish nightmare??? http://news.pickuptrucks.com/2009/04/mce-5-variable-compression-gas-engine.html

I have some marine grade black vinyl I was going to use to make my own 2 piece doors. Bought a set and now I have this stuff left over. I'm thinking of using it to make waterproof-ish side panels for the bed section and inside of fiberglass inserts. Would like to use some kind of firm plastic...

Stock axles. U-joints look OK, but original (or at least pretty old). 50$ plus shipping.

Got a remanufactured edelbrock through Summit last Sep. Had problems with ign system and finally got them sorted out yesterday. Obviously, I had no idea there was any problem with carb until the ign was fixed. Summit only warantees 90 days. The passenger side idle mixture screw does what...

Needed?? Even just "thickening" plating under where the tabs mount?? Plan is 2 mounts. One on plate that fits between my blackbox (doubler) and trans (C6). The other on both sides of the 205 case. Using 2 tabs and one bushing setup per end of each mount (4 total).

78 Ford High pinion D44 solid front axle. 3.54 gears, welded diff. Very recent rotors/pads/calipers, wheel bearings, and brute force U-joints. includes track bar, radius arms, tie rods (sleeved with 1.5" tube) and drag link (sleeved with 1" tube). 78 Ford 9". 3.54 gears. New differential...

May be a re-post, but so what.......:p http://www.youtube.com/watch?v=j1pNZXWp39M

in patton, PA. Anyone been there, how was it? http://www.rockrunrecreation.com/index.php?page=about

Newer superduties and 3/4-1 ton dodges use 1350 CV shafts, correct? Plan was to get some of them and shorten them, getting flat flange yokes for both end of the 205. I have heard that some of those newer shafts do not allow joint replacement.

Not exactly sure what they mean by the wording in section 3d, but I don't like it, even if they mean buy parts that are greener if you can. http://www.leg.state.or.us/09reg/measpdf/hb2100.dir/hb2186.intro.pdf

If I can't get my 70 302 running right and I've "finally" ruled out ign and carb problems (when I get to that point), I have 2 motors I could use for replacement. The 351 came out of a 74 bronc that had a 435 behind it. I think it would be a drop in with a flywheel cut, new clutch (maybe), and...

My current 302 idles perfect and runs decent until the secondaries open, then it falls on it's face. I had pulled it last year, full regasket, new chain, remanned edebr carb, and converted to electr ign. I sent carb back and got yet another remanned carb and also tried another edbr carb off a...

Guy I know works @ a local junkyard and says he has quite a few explorer rear disk rears. 100$ each. PM me, I'll hook you up with him. BTW, if thats not a good price, someone PM me and I'll delete this ad (price sounded good to me). NO SHIPPING (DON"T EVEN ASK)

Is there a fiberglass half cab top avial and what does it weigh? Thinking it may be an option for putting it on/off easily by one person, using it for winter driving, without having to haul that full steel top on/off. I'm not really that interested in a soft top for winter driving. Also, will...