Search results

I know the difference between the two, but i keep debating what would be "better" in my situation. My bronco is 98% street driven, sunny day, ice cream shop, family, kinda cruisin. I suppose it may see a gravel road from time to time. An open rear diff would be the most economical, correct...

i'm putting a new steering box in to replace my tired and leaking original. i noticed the holes inside the ports are off centered, one way off to the side. is this normal? i haven't heard back from borgeson yet.

call me lazy but i'm not interested in piecing together a kit and i don't have a ton of time to search for parts and visit junkyards. do any of the vendors offer an off the shelf hydraulic kit? something that'll mate to an early bronco bell housing/ ax15 or stock 3speed?

My box is currently leaking pretty bad on the steering shaft side. It started a little bit after I installed my hydroboost w/saginaw. Did a quick search and folks are recommending a rebuild or something beefier. I'd rather just replace the entire box and start fresh. I don't offroad my...

All gone!

I bought this from a fellow member last year, and I think I'm going to stay carb for a while. Also included is the fuel line kit 526-8. Not looking to make anything off this, just asking what I paid. $850

i was considering the covercraft spacer mesh precision fit covers for my stock rear seats. my kids are always complaining how hot the seats are with the original vinyl. anyone use these covers? any other solutions? i prefer as close to an oem fit as possible. not into anything that looks like a...

attempted to take the car out for a spin today and quickly discovered that it would not shift into 1,2,3 while the car is running. i can get it into reverse if i slam it in. baffled why it would suddenly not work. it shifts into all gears easily when the car is off. the only thing i can think of...

i just finished (kinda?) installing my Wildhorses MOAB hydroboost brakes and saginaw pump. i bought everything from WH. I go to reinstall the belt and it's too short! I recall asking sales if i needed a new belt with this pump and was told no. what am i doing wrong here? the belt won't fit over...

selling a set (4 spacers) brand new Bora spacers. i ended up not needing these for my wheels and steering setup. save a few coins and skip the 4-10week wait time $300 shipped

I've always used a power bleeder on my other cars and figured i'd give it a try on the bronco. I haven't had much luck with the speed bleeders. They either don't tighten/seal, or the still leak. I've tried multiple brands too. Perhaps i keep getting bad quality bleeders? I did a little...

stock 302 with 3speed on the floor here. i'm running 35s with 3.50s. i've asked a few locals and get about equal suggestions in either direction. what would you do next? ax15 swap or 4.56s? cost isn't a deciding factor for me. i figure i'll do both eventually but which swap would you...

I'm not really sure i want to do this, but it might suit my needs better to just go with a 2-1 setup. Selling: TBP Stainless long headers (2k miles on these) James Duff aluminized dual exhaust with Borla mufflers and 90* tail pipes (200 miles on these) I don't want to deal with shipping such a...

stock 302 with 3 speed manual, stock gears and 35s. I'm entertaining 4.30 gears... this is a street bronco. I called a few local shops and they all want ~$5k for a ring and pinion swap if I bring the bronco in. That seems a little ridiculous to me so I'm considering a 3rd member from WH...

SOLD

Both drop bracket and drop pitman arm are new never installed. came with my 3.5" kit but i went TRO and riser bracket. pitman arm not pictured $35 shipped

I'm running the rubber floor mats from our popular vendors. I've started routing my speaker/amp wires. Naturally, I lifted the rubber mat and discovered a decent amount of condensation on the floor boards. Enough that i had a bar metal spot (scratch) that had started to rust already. Whats...

i've decided to go another route. these are originally made for a CJ or YJ but if you flip it upside down it'll fit on our flat transmission channel. this will fit 5.25" speakers but i planned to shave the hole a tad bigger to fit my 6.5" speakers. i paid $89, now selling and it's still new...

Unfortunately, my bolts were so seized that they broke right off when removing the rear stakes from my hardtop. I honestly was gonna run without them, but then started reading a few posts where folks stated their rear fender rails started bowing out. Just curious how many of ya'll run the...

any recommendations for rear seats with built in seat belts? i need to come up with a seat belt solution for the rear since my daughter will likely be in a booster soon and a lap belt won't work. im running the stock rear bench at the moment which works fine for their harness style car seats.