Search results

Thanks. Only good thing about winter is it allows me time in the shop.

Took this one a couple weeks ago before I parked it for the winter

Sounds like you have your bases covered. I do not have a soft top. May get one in the future. I do have the original doors and top. Need to take her out of service for the winter have more stuff to make for it.

Demon, Yes it is getting cold! Drove it today not to bad. Took it to work at a couple weeks ago at 32 degrees from Papillion to Council Bluffs. Cold down the highway!!! Today may have been the last day. Going to finish the cage and have it powder coated for the spring.

Does it have front disks? 9" ford narrow housing is worth taking

That is cool! Cut it if that is what you want. Life is short. Front bumper is no joke.

Thank you. She has been putting up with BS for awhile. Either she really likes me or I have her fooled:)

I was baking bread and pies before I installed it that is for sure. Added the wing in August and it was upper 90's here in Omaha. After it was installed it was whole diffent rig. Super cool inside. No more baking in sun. I then realized while Stroppe originally constructed them. For the shade...

Sounds cool post a photo up I would like to see it.

Thank you for the kind words

http://i1306.photobucket.com/albums/s571/qexe158/Bronco%20Wing/IMG_3139_zps5d7e30f9.jpg?t=1383491146 http://i1306.photobucket.com/albums/s571/qexe158/Bronco%20Wing/IMG_3136_zps0510e643.jpg?t=1383490504 Polished a third of the skin. had a to sand a bunch of skratches. Took it to 1500 wet sand...

Here are the final side plates cut out http://i1306.photobucket.com/albums/s571/qexe158/Bronco%20Wing/IMG_3124_zpsa4c774ec.jpg Support at "B" hoop made this 1 3/4 tall to give the wing some rake http://i1306.photobucket.com/albums/s571/qexe158/Bronco%20Wing/IMG_3127_zpsc03084c3.jpg...

Here is the sheet sitting up on the bronco. I had some help with the front edge in a press brake. Never used one before. The rest was all done with a shear and 8' brake http://i1306.photobucket.com/albums/s571/qexe158/Bronco%20Wing/IMG_3081_zpse40a5afc.jpg This is the structure that will...

My lady friend jumped in on this one I was too cheap to buy a bikini top so I decided to try to replicate a wing that is simular to the Big Oly bronco and the early Baja Bronco's from back in the day. I believe these were built by Stroope? My dad had a 6x12 sheet of .90 alum that he...

This color also comes in powder coat. Red oxide powder coat. I had my center section done along with the front radius arms, bell housing, and front dif cover.

Ok so it looks like 33's would put me at 6'6.5" and 35's would put me at 6'7.5" right at the door. Thank you that helps.

I bought a 69 out of a field sat for 20 years. had 3 different size tires on it. Got it home and took it apart. I already added 1" body lift and was planning on a 3.5" lift. If I go with 35" tires How tall with the bronco be from the ground to the top of the steel roof. Worried about not being...

Thanks everybody! lots of good advise. Looks like l may go with the 33's I would like to go with 10.5 wide but those darn Generals with the Red letters only come 12.5 wide. I am located in Nebraska so elevation should not play a problem being short on power. Using the stock 83 will be the...

I should mention I will be running power disk brakes (Drums Rear) and stock Bronco power steering set up.

I am working on a 69 Bronco. I am installing a stock 1983 mustang GT engine (Originally 175 Hp). With added rockers and headers. I will be running a original 3 spd stick trans and dana 20. 1" body lift 3.5 suspension lift. Rear flars and the front fenders not cut. From what I gather from...