Search results

I must report it was my error all this time. The front door hinges “A” pillar wasn’t aligned for enough in to get the squareness that I needed. My door window frame was hitting the windshield frame and wouldn’t allow the door to move in as far as needed. Problem solved. Thanks to everyone’s...

Would that fix the problem I’m having. I’m willing to try anything. I never thought body mounts could be the problem. Any particular place to start? Thanks

It must be camera angle

We just simulated the space tire carrier/.tire with a snatch strap and pulled it in. Didn't change the b pillar at all. Thanks thou!

I can give that a try and see what happens. Thanks

Trying to align panels so I can start final body work and primer. The issues I'm having is the passenger side "B" pillar where the upper quarter and door meet are not lined up. See attached pictures. There is a 1/4" gap at that location. The bed rails measure 56" side to side and the lower...

Yep , I missed last years Red one. Got two this year.

Blue Bronco Christmas Pillow at home depot. Great stocking stuffer. https://www.homedepot.com/p/Home-Accents-Holiday-18-in-Holiday-SUV-With-Christmas-Tree-Pillow-22AR07856/320186555?

Do they have a good working top for the gas cap to seal too and close tight? If so you can text (985-788-1791) me a price with shipping going to 70460. I've ordered parts from you before...Thanks

Looking for a good used auxiliary tank filler neck for my 75 Bronco. Mine is screwed up where you put the gas cap on it and just spins Thanks, Bub

I found on that will work: here is a link incase someone else needs them D1UZ-9030-A Scott Drake

Very pricey but nice. Thanks for the heads up! Thats what I would like but, something I can paint body color in that size. I would also like it to fit more flush to the quarter panel.

Anybody know of a gas cap the fits 75 Bronco that covers and hides the stock filler neck screws? Pictures sources? Thanks, Bub

It's only been two days, I'll figure it out. It lined up once before when I was test fitting everything now...not sure why or what I did. Thanks

ok I'll give it a try, thanks

My after market fenders line up good. It’s the top rear of the door that doesn’t line up with the original upper quarter panel. Thanks for replying though.

Drivers door is an original door can't seem to figure out why the top right edge won't line up. Any suggestions would be appreciated. Door is pretty square except for the top edge. Thanks, Bub

Today was a good day. 2 Coats of epoxy primer on the following pictures. Still have the 2 doors, tail gate and hood. Need to construct something better for final paint. Its to cluttered to do everything in the double car garage. It's ok for the priming stage but, not final stage.

Thanks

A while back I closed up the large radio hole on the dash. I drilled out the holes for the stock radio. Fits perfect! Started the sanding of the front grill. Some minor imperfections but should be solid to use.