• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

170 cid

TNcowboy

Full Member
Joined
Aug 29, 2019
Messages
220
The log head will be quite a hindrance to airflow. You can check out fordsix.com for options like changing out the head
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
It has been done. I recall the results were a huge improvment, almost as good as a base V8. But fuel economy gets worse (than the V8) and the extra cylinder pressure will require premium fuel. The head doesn't flow good so the power still won't be there. The bottom end isn't exactly stout, that is a long piece of a cast crank.
 
OP
OP
alstonrobert66

alstonrobert66

Jr. Member
Joined
Mar 7, 2022
Messages
58
Loc.
texas
well it was a thought
I look at fordsix seems like a lot of work
and lousy fuel mileage oh well
thanks guys
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
haha! Yep, there ya go. Down the rabbit hole and snowball hill rolling.

Paul
 
Top