SOLD 1994 351W (roller block) with Lightning intakes

[kholding]

Back on the market:

1994 Roller 351W- fresh rebuild from Fultz Machine Shop here in Las Vegas. New rings, bearings, seals, gaskets, brass freeze plugs, exhaust valves, pushrods, etc...Everything was hot tanked and repainted gunmetal gray.

New Comp Cams XE264HR-14 cam (full K-kit with new springs, retainers, seals, timing chain and gears).

GT40-3 bar heads (rebuilt with engine)

True Lightning/GT40 upper and lower intakes

New Explorer timing chain cover/new water pump and balancer rebuilt/rebalanced by Damper Dudes.

Explorer serpentine brackets (bare)

Explorer fuel rail and newer style 19lb injectors (spare fuel rail as well).

Original E7 heads, original cam and Explorer throttle body included.

This engine is ready to be dropped in your project.

The price is firm (I'm already losing money on this).

Thanks for looking.

 

[bronconut73]

Back on the market:

1994 Roller 351W- fresh rebuild from Fultz Machine Shop here in Las Vegas. New rings, bearings, seals, gaskets, brass freeze plugs, exhaust valves, pushrods, etc...Everything was hot tanked and repainted gunmetal gray.

New Comp Cams XE264HR-14 cam (full K-kit with new springs, retainers, seals, timing chain and gears).

GT40-3 bar heads (rebuilt with engine)

True Lightning/GT40 upper and lower intakes

New Explorer timing chain cover/new water pump and balancer rebuilt/rebalanced by Damper Dudes.

Explorer serpentine brackets (bare)

Explorer fuel rail and newer style 19lb injectors (spare fuel rail as well).

Original E7 heads, original cam and Explorer throttle body included.

This engine is ready to be dropped in your project.

The price is firm (I'm already losing money on this).

Thanks for looking.

Sounds killer.
Why are you not using it?

 

[kholding]

I keep bouncing back and forth with doing a 4bt swap.

I have been trying all day to upload pictures but it keeps getting locked up. I have it listed in the Las Vegas Craigslist as well (with pictures). Can't open CL right now to paste the link. I guess I'm just having a bad computer day.

 

[kholding]

Here is the link:
http://lasvegas.craigslist.org/pts/5007208606.html

 

[SSDDBRONCO]

Do you have a payment plan lol? I'm actually being serious about that though

 

[camp9k]

Nice! great cam choice!

 

[bizarrocolin]

Very nice...any chance you make trips down to LA area?

 

[rguest3]

What Pistons were installed with rebuild? Compression ratio with GT-40 heads?

 

[kholding]

@bizzarocolin- I don't have a trip planned to LA anytime soon but Vegas is always a fun road trip!

@rguest3- They are the stock Hypereutectic Pistons so I believe it's 8.5:1.

 

[bizarrocolin]

A trip to vegas would be fun. I could try to win the cost of the engine at the craps tables.

Interested in any trades to paritally offset the costs? Even non-bronco stuff.

 

[kholding]

Sorry, I need the funds for the 4bt.