• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

2.7 eco boost

GABoy005

Jr. Member
Joined
Dec 12, 2005
Messages
98
Has anyone tried running a 2.7L eco boost and transmission out of a new F150. I have a work truck with 15k miles that was rear ended and totaled. I am restoring a ‘72 for my wife and thought about using it.

Any direction or thoughts would be appreciated.


Sent from my iPhone using Tapatalk
 

1sicbronconut

Contributor
Bronco Guru
Joined
Dec 26, 2006
Messages
2,469
I've mentioned this swap before over the 3.5L Eco Boost but I've never heard a response from anybody about it. The pro's would be it's compact size, con would be trying to figure out a power steering set up for it. There are some electric kits out there that put a electric motor inline with the gear box but I'd look at trying to use a electric pump from a Jeep product. It could work but it will be a lot of work for sure, I've been a Ford tech for over 30 years and don't think I'd tackle it I tend to stay with the KISS methods myself. :)
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
I think the overall engine is the same package as the 3.5 engine.

Being the truck is so new you are likely to have a bunch of headaches getting the engine to run stand alone. I remember a friend (who was a Ford tech) telling me that you could not start a car without the insterment cluster plugged in. To the point that if you unplugged it with the engine running, the engine would die.

I am sure it will be done. Putting the hardware in has challenges but that is the easy part. Unless you have some solid resources lined up for the electrical it isn't going to be a usable powertrain.
 

1sicbronconut

Contributor
Bronco Guru
Joined
Dec 26, 2006
Messages
2,469
I think the overall engine is the same package as the 3.5 engine.

Being the truck is so new you are likely to have a bunch of headaches getting the engine to run stand alone. I remember a friend (who was a Ford tech) telling me that you could not start a car without the insterment cluster plugged in. To the point that if you unplugged it with the engine running, the engine would die.

I am sure it will be done. Putting the hardware in has challenges but that is the easy part. Unless you have some solid resources lined up for the electrical it isn't going to be a usable powertrain.

Actually quite a bit smaller package than 3.5L but as you stated it hasn't been done that I know of either so it will be a long haul figuring out the electronics.
 

ssray

Contributor
Sr. Member
Joined
Apr 19, 2010
Messages
922
Loc.
South Central NE
Just happened to be on Holley's site yesterday and noticed they have some packages for GM and Ford engines that look like they integrate with sensors and injectors but I didn't see detail on years etc. They did have options for auto transmissions as well. Even if they would work the cost looks to be in the 2k$ range so pretty pricy even if they had em for late model engines. I get the feeling they're geared to simplified self tuning for anyone but it comes at a price.

Scott
 

ssray

Contributor
Sr. Member
Joined
Apr 19, 2010
Messages
922
Loc.
South Central NE
I've seen the electric pump in my Aunts 5(?) year old Grand Cherokee and it has pretty good sized lines running to it from the rack. Not sure if there's an accumulator in there somewhere but the pump is built fairly compact and is right out in the open in front of the engine. I've not been under the hood of the newer Fords, what are they using that won't move over well? Direct electric assist?

Scott

I've mentioned this swap before over the 3.5L Eco Boost but I've never heard a response from anybody about it. The pro's would be it's compact size, con would be trying to figure out a power steering set up for it. There are some electric kits out there that put a electric motor inline with the gear box but I'd look at trying to use a electric pump from a Jeep product. It could work but it will be a lot of work for sure, I've been a Ford tech for over 30 years and don't think I'd tackle it I tend to stay with the KISS methods myself. :)
 
Top