SOLD 3 speed plus overdrive (4 speed) transmission

[markatherton]

I have a 3 speed overdrive (4 speed) transmission. 4th gear is an overdrive. It has been converted to be used in an early bronco. It is complete and has just been professionally rebuilt by Border Parts here in San Diego. It is a bolt in replacement for your original 3 speed transmission. I do not have a shifter for it. I believe it uses the same shifter as a bronco 4 speed toploader which can be purchased from Advanced adapters. A 1 inch body lift is recommended. $750 plus actual shipping or pick up at my shop in El Cajon. Mark in San Diego. Beach City Broncos 619 997-9954 or matherton619@gmail.com

 

[Mtgrizzlymn]

Is the length the same?


Sent from my iPad using Tapatalk

 

[markatherton]

transmission

Length is the same.

 

[sk1nw4lk3r]

What kind of transmission is this? AOD?

 

[toddz69]

What kind of transmission is this? AOD?

It's a manual 4 speed transmission.

Todd Z.

 

[BajaBronco]

I dont get it. Just kidding It's alot like a toploader, only it's for cruising.

 

[Viperwolf1]

Is the length the same?


Sent from my iPad using Tapatalk

The 4 speed top loader is just slightly longer than the 3 speed, 1/2"-3/4". It will easily mount with only slight elongation of the cross member bolt holes.

 

[RPM289]

What tail cone are you using to adapt to T case? I had one of these in my 66 mustang and loved it 24mpg with 350hp 289 4bbl. 300:1 rear.

 

[sk1nw4lk3r]

It's a manual 4 speed transmission.

Todd Z.

Hurr Durr.

Definitely could've re-read the post and understood, flew through it too quick, lol.

 

[markatherton]

trans

The adapter is the stock 3 speed adapter

 

[Viperwolf1]

The adapter is the stock 3 speed adapter

I believe the stock adapter needs to be modified a little. As I recall it needs a hole drilled for the additional shift rail to pass into.

 

[BajaBronco]

Yes, stock 3sp adapter needs another shift rail hole and rear Trans bearing recess area opened up to larger size.

 

[ransil]

I have a 3 speed overdrive (4 speed) transmission. 4th gear is an overdrive. It has been converted to be used in an early bronco. It is complete and has just been professionally rebuilt by Border Parts here in San Diego. It is a bolt in replacement for your original 3 speed transmission. I do not have a shifter for it. I believe it uses the same shifter as a bronco 4 speed toploader which can be purchased from Advanced adapters. A 1 inch body lift is recommended. $750 plus actual shipping or pick up at my shop in El Cajon. Mark in San Diego. Beach City Broncos 619 997-9954 or matherton619@gmail.com

Boarder parts is still in business !!

isn't that the first off road shop? ;D

looks like they are still in the same place.

 

[markatherton]

trans

Yes Border parts is still in business in the same place. I just sold 2 broncos for Jon that he has owned for 25 years.

 

[the_kid23]

3 + OD transmission

I sent you a PM. Thanks