• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

302 351 Head Thermactor hole size?

Desert Thrasher

Bronco Guru
Joined
Jul 14, 2001
Messages
2,353
Are they all the same size thread, 5/8-11? I bought a set of plugs for the holes in the head. But they do not want to even start threading in. I know there are threads, I seen them before I installed the engine. Just wondering if different years maybe had a different size thread?
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
5/8 11 is correct. The ford inserts are part #F4ZZ-6E086-A, but there kind of pricey now. I bought some recently and they wanted about $20 each.
 
OP
OP
Desert Thrasher

Desert Thrasher

Bronco Guru
Joined
Jul 14, 2001
Messages
2,353
I bought the Trick Flow ones from summit, they were $4 each.
Maybe I need to chase the threads with a tap, kinda sucks now that I got the engine in the bronco though.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,110
I know I have ran across 2 different sizes over the years. One plug I pulled out of one head would not plug the hole in another head. Had to go to the store and buy a bolt to plug it.
 
OP
OP
Desert Thrasher

Desert Thrasher

Bronco Guru
Joined
Jul 14, 2001
Messages
2,353
Hmm, I think Ill get some 9/16 bolts and try them. When the engine was out I had a 9/16 bolt that did thread in, but it was about 4 inches too long. Then I read they were a 5/8-11 thread and figured that had to be correct. Oh well.
 

mattt

Bronco Guru
Joined
Sep 23, 2006
Messages
3,814
I went to the local McFadden Dale industrial hardware and picked up a pair of plugs for $2. Mine are 5/8-11. If you don't clean the carbon/soot out of the threads, the plugs probably will not go in. I had to clean mine to get the plugs in.
 
Top