Break Down Bry
Newbie
- Joined
- Dec 31, 2012
- Messages
- 11
Hello everyone,new guy here, looking for some advise. I want to rebuild my Windsor engine this winter.Here's what I have, 1974 sport, C4, 44 up front
9" in rear, 4;11 gears, spool gear in rear. 33" tires. Here's what I was thinking..
hot tank the block, stock bore,Clevite bearings,Comp Cam kit (w/ double roller,
matched springs,retainers, and roller lifters).Edelbrock RPM Air gap intake, I have Edelbrock 600 carb, ported heads,dumping into shorty headers ,that I also have on truck already. I forgot to add the cam specs are 287 duration and 513 lift, RPM range is 2,000-6,000. Also was thinking a Melling HV oil pump. Any thoughts?
9" in rear, 4;11 gears, spool gear in rear. 33" tires. Here's what I was thinking..
hot tank the block, stock bore,Clevite bearings,Comp Cam kit (w/ double roller,
matched springs,retainers, and roller lifters).Edelbrock RPM Air gap intake, I have Edelbrock 600 carb, ported heads,dumping into shorty headers ,that I also have on truck already. I forgot to add the cam specs are 287 duration and 513 lift, RPM range is 2,000-6,000. Also was thinking a Melling HV oil pump. Any thoughts?