• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

4x4x2 porting for hydro assist?

BroncoBoy72

Sr. Member
Joined
Sep 30, 2004
Messages
357
Loc.
Marana Arizona
Well I got my rebuild kit from WCB yesterday and have my 2wd box apart and ready to install in the 4x4 f150 box. I decided to go the route of porting the box and running hydro assist, has anyone ported and tapped their own box? I have found a lot of info on how to tap the chevy box but nothing on the f150 box. Any help would be much appreciated!
 
Last edited:

73bronco

Sr. Member
Joined
May 10, 2007
Messages
936
Kind of a pain. I did mine but ended up welding an adapter to the port running down the side of the box. If you don't mind cutting the core support a little you could tap the end of the box for the high pressure on left turns. I can try to take some pics if you need. The right side high pressure port can go many places easily.
 

gravy

Bronco Guru
Joined
Sep 4, 2006
Messages
1,236
Loc.
Parsippany
I had mine ported at PSC. I couldnt find any info either but wanted to play it safe since I had just forked over 600 for the box and adapter.
 

73bronco

Sr. Member
Joined
May 10, 2007
Messages
936
Wow thats for the pics Broncosuds!

Those are pretty much identical to what I did with mine. Sorry for my lack of coming through with the pics. The port that travels down the side of the box is a pain to drill and tap. If I had to do it again I would cut my core support and drill and tap the end of the box as it sees the same pressure as the port on the side of the box.
 
OP
OP
BroncoBoy72

BroncoBoy72

Sr. Member
Joined
Sep 30, 2004
Messages
357
Loc.
Marana Arizona
Those are pretty much identical to what I did with mine. Sorry for my lack of coming through with the pics. The port that travels down the side of the box is a pain to drill and tap. If I had to do it again I would cut my core support and drill and tap the end of the box as it sees the same pressure as the port on the side of the box.

hey no worries man its all good!
 
OP
OP
BroncoBoy72

BroncoBoy72

Sr. Member
Joined
Sep 30, 2004
Messages
357
Loc.
Marana Arizona
Done like dinner! Ported, tapped and rebuilt. Just need to finish welding in my support plate on the inner portion of the frame. Thanks for the help again fellas.

Jonathan
 

Attachments

  • steering box 001.jpg
    steering box 001.jpg
    124.7 KB · Views: 255

abbate3

New Member
Joined
Jun 19, 2007
Messages
31
Loc.
Lake Zurich, IL
Looks like you used a pipe thread to -AN adapter fitting. Does anyone use anything other than pipe thread to tap the box? Like an o-ring fitting or something else?
 
Top