• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

69 Bronco Steering Issues

jdavisjr

Contributor
New Member
Joined
Nov 11, 2025
Messages
35
I received several suggestion to help me decide on how to choose upgrades for my Bronco, (Post Thread, "Radius Arm Confusion"). Thank you! Here are the option I am considering 1) Powering Steering kit, SKU:1969. Wild Horse. 2) Tie Rod & Drag Link Kit 3 way adjustable, SKU: 2351. Wild Horse. 3) Track Bar, SKU: 1231. Wild Horse. I am also interested in the James Duff, Early Bronco Dual Sport Bump Steer Eliminator – Tie Rod Over.

Again, the Bronco will be used on an occasional 4 wheel drive trip. We have a family cabin in the Poudre Canyon, west of Fort Collins in Colorado. The cabin is about a hour and a half from our house. We have several places to visit in this area that requires a 4x4. Our family car is a Ford Flex, all wheel drive, low clearance 😫 Thus, the reason for the Bronco purchase.

Back to decisions. The Wild Horse items, total about $600.00. The James Duff system is around $1,100.00. The James Duff system seems to be more robust, and would allow for more difficult trails. Is the additional $600.00 worth it? I also noticed the Jams Duff system appears to have more accessory in the kit. I am not concerned with spending the additional funds, only if it makes since.

I have a few question about the Power Steering kit from Wild Horse. I have attached pictures of the existing steering shaft. Will this be an easy installation, or nightmare. I did watch a video on installing the steering linkage from Wild Horse, looks to be straight forward.

I know I will need help when I start removing the existing power steering box, that is installed on the inside of the frame.

I would appreciate any thoughts on these options or, are is there a better way that I am not familiar with.
 

Attachments

  • Lower Steering Shaft.jpg
    Lower Steering Shaft.jpg
    194.2 KB · Views: 34
  • Upper Steering Shaft.png
    Upper Steering Shaft.png
    1.1 MB · Views: 38

jscheier

New Member
Joined
Jun 15, 2026
Messages
46
Loc.
Parker, Colorado
I just installed this kit from Wild Horses two weekends ago (kit 1967). I didn't need the water pump and crank pulley as my 69 already had them as someone installed AC. Install was on my 69 with manual steering. Kit went on super easy. Steering shaft wasn't too difficult other than having to pull the steering column, pull the OEM shaft, cut it and then grind the shaft to fit the new collapsible shaft coupling. It also took me 3 trips to VatoZone to get the right V belt (measuring is hard). I think I ended up with a 51" belt.

I will say, if I had to do it again, I'd do the PS install before I did the power brakes as the booster and bracket made access to some of the bolts to remove the column a little more challenging (actually, reinstalling those bolts was the challenging part).
 
OP
OP
J

jdavisjr

Contributor
New Member
Joined
Nov 11, 2025
Messages
35
I just installed this kit from Wild Horses two weekends ago (kit 1967). I didn't need the water pump and crank pulley as my 69 already had them as someone installed AC. Install was on my 69 with manual steering. Kit went on super easy. Steering shaft wasn't too difficult other than having to pull the steering column, pull the OEM shaft, cut it and then grind the shaft to fit the new collapsible shaft coupling. It also took me 3 trips to VatoZone to get the right V belt (measuring is hard). I think I ended up with a 51" belt.

I will say, if I had to do it again, I'd do the PS install before I did the power brakes as the booster and bracket made access to some of the bolts to remove the column a little more challenging (actually, reinstalling those bolts was the challenging part).
Thanks jscheier, how long was the entire install? Any special tools required or to make the install easier?
 

jscheier

New Member
Joined
Jun 15, 2026
Messages
46
Loc.
Parker, Colorado
Thanks jscheier, how long was the entire install? Any special tools required or to make the install easier?
Pitman arm puller and a steering wheel puller are the only special tools needed. Start to finish was maybe 6 hours with finish being before the 5 trips to AutoZone to get the correct length v-belt. I used 14 gauge wire to figure out belt size, and either totally pooched the measurement or just plain did something wrong. It took ~2qts of power steering fluid to fill / bleed.
 
Top