• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

74 steering column assembly diagram?

roundhouse

Bronco Guru
Joined
Sep 5, 2003
Messages
2,956
edit;
the T bolts hold it all together?
didnt notice that when i took it apart


putting my 74 steering column back together after replacing the bearings, and evidently ive already forgotten how it came apart.

trying to figure out how the stuff at the top goes back on.

bearings snap ring aluminum housing etc.

im replacing the 3 speed shift collar with a blank one since I have the NV3550


cant figure out what holds it all together.

does the snap ring hold the shift collar on?
with the bearing and rubber bushing?



and the turn signal collar housing bolts to the shift collar?

i cant find a decent diagram anywhere.
 
Last edited:

AC932

Full Member
Joined
Sep 17, 2018
Messages
254
Yeah T-bolts hold it all in. Should be shift collar, then the thing the turn signal (turn sig collar?) screws to. T bolts hold all that to the column. Then all those other bits. This picture is sorta a mess but might help some.

lhN7QIc.png
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
early or late 1974 collumn? late had padded steering wheel and different spline size.
 
Top