84 Bronco Slotted Mags

[coreyvan77]

Is anyone here running the slotted factory mags that came off say the 84 Bronco era. If so I was wondering if the backspacing works out with minimal rubbing on the radius arms. I have a chance on picking some up and was hoping to get some input from someone who may be running them. They're a hour away so I can't just measure them up myself. Thanks.

 

[Jeepster]

I had 80's slots on the Bronco that I had on a 76. They had what looked like a washer on each of the lug studs for spacing the rim out. No rubbing.
Check my gallery for a photo.
They were 15x6 and had 31x10.5 tires on them.
They were alright but, a little narrow for my liking. Old school look.
A 8.5" wide would be right looking for a bigger tire like a 10.50

 

[sevenTseven]

I actually picked up a set of these Friday. I can run out and measure in a few minutes.

 

[coreyvan77]

That would be awesome 7T7. They look to be a little shallower dish compared to the Indy's and others. But probably look nicer than factory steelies.

 

[sevenTseven]

Looks like about 3.75" but i took pics, so you could see for yourself.

 

[fordtrucks4ever]

With exception to 76-77 Broncos, all factory 1/2 ton Ford truck wheels from 1939 to 1996 will interchange. Most will fit the 76-77, but not all.

 

[coreyvan77]

Thanks for the awesome Pics SevenTSeven. It is greatly appreciated. I'm gonna have to run and check out what kind of shape these others are in. Thanks again.

Corey