• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

9" housing question

bigjhoov

nobody
Joined
Apr 10, 2005
Messages
3,583
Bought a later model housing today because it had the right bolt pattern for some disc brackets I want to use. Flange to flange it's 57". I would've sworn EB was 57", but it's 53 1/2", darn. What's the 57" out of.
 

Bronco73

Contributor
Bronco Guru
Joined
May 29, 2003
Messages
3,016
Loc.
Cape Coral, FL
Are the leaf spring pads on top or bottom of the axle tube? I think the 67/68 mustang axles are that width.
 

feitctaj

FNG
Joined
May 3, 2003
Messages
4,319
Loc.
Group W Bench
Bought a later model housing today because it had the right bolt pattern for some disc brackets I want to use. Flange to flange it's 57". I would've sworn EB was 57", but it's 53 1/2", darn. What's the 57" out of.

When I was looking for a BB 9 and asking q's on here somebody sent me to a webpage that had all the apps for the diff widths of 9 in. , I am looking for it as I type. But that was 5 years ago and I don't have it saved, I'll keep looking.
 
Top