• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Almost done my build!!!!!

johnny_nv

Jr. Member
Joined
Feb 18, 2016
Messages
52
Loc.
Toronto, Canada
a few of these pics are from some weeks ago. but Some are from yesterday.

REMAINING TO DO LIST
Replace pinion seal on Rear diff/drive shaft. Any tips?
Primer, sand, paint. (Caribbean turquoise)
Assemble
Enjoy

SHOULD I DO A BODY LIFT? 1" maybe 2" inch max? I don't want a big gap between bumper/tailgate.


https://www.dropbox.com/sh/aewbb9wdznlbsu6/AABMtw_AonzjnkndK6TQXmGPa?dl=0

Any comments, recommendations, or ideas would be helpful!
(yes, that's a custom stainless steel windshield cowl)
All the best everyone.
Johnny
 

Justafordguy

Bronco Guru
Joined
Sep 26, 2009
Messages
6,255
Hey Johnny, Looks good so far. Hard to tell about the body lift with it still torn down. After you get it put together with the tires and wheels you plan to run it will be a lot easier to decide about the height.
 

jmangi62

Bronco Guru
Joined
Jul 28, 2013
Messages
2,512
Nice job johnny_nv, that's one helluva windshield cowl, heres mine from the rear with a 1in. body lift. :cool:
 

Attachments

  • IMG_0682.jpg
    IMG_0682.jpg
    94.7 KB · Views: 101
  • IMG_0683.jpg
    IMG_0683.jpg
    76.5 KB · Views: 112

spap

Bronco Guru
Joined
Jan 2, 2010
Messages
2,642
Never done my friend, you just get a bit closer Looks good
 
Top