• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Another Bukin Suspension Mod

OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
The shock towers that we had decided to square-box in ended up going another direction when we decided to go ahead with the idea to box in the whole area using the cage to attach mounting points.
A lot of open space was lost doing it this way, but other than that issue it looks really clean. I can still remove the panels very quickly as we will be storing spare equipment behind them such as drive shafts and axles.
 

Attachments

  • IMG_18326887085354.jpeg
    IMG_18326887085354.jpeg
    102.3 KB · Views: 180

swyman

Jr. Member
Joined
Sep 28, 2009
Messages
137
Loc.
Blissfield
Clean looking finish product! I am planning to use the cage as my tie in points also but try to incorporate a short bench seat in the rear if I have the room. Shocks are ordered, went with 2.0 kings with 14" travel and compression adjusters. Was going to go with 2.5's but was directed otherwise by Ben @ Filthy motorsports. I don't really have any experience so I got a real education when I ordered my shocks. Have a lot more to learn but at least I am moving forward. Getting ready to order a tube bender, either a JD model 32 manual or a Pro-bend 32 (uses JD's dies) but the pro-bend is hydraulic and a vertical vs JD's horizontal? Have any input as to which would be better? Keep the feedback coming!
Shane
 

u10072

Bronco Guru
Joined
May 18, 2007
Messages
2,249
Love the rear links. What source did you end up using for the sway bar in the rear? Any thoughts on running one in the front? Love to see some testing video soon!
 
Last edited:
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
Clean looking finish product! I am planning to use the cage as my tie in points also but try to incorporate a short bench seat in the rear if I have the room. Shocks are ordered, went with 2.0 kings with 14" travel and compression adjusters. Was going to go with 2.5's but was directed otherwise by Ben @ Filthy motorsports. I don't really have any experience so I got a real education when I ordered my shocks. Have a lot more to learn but at least I am moving forward. Getting ready to order a tube bender, either a JD model 32 manual or a Pro-bend 32 (uses JD's dies) but the pro-bend is hydraulic and a vertical vs JD's horizontal? Have any input as to which would be better? Keep the feedback coming!
Shane

Congrats on your upgrade. It makes a huge difference.

Quality benders are personal preference once you get used to using a particular one imo. Our shop likes the JD-squared bender. It's set up for electric and hydraulic bending.
 
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
Love the rear links. What source did you end up using for the sway bar in the rear? Any thoughts on running one in the front? Love to see some testing video soon!

Thanks, I used Speedway Engineering for the sway bar and we built our own arms. I went with the rear for more stability pre-running and less body-roll on the trail. They made a big difference testing yesterday. The biggest difference I noticed right off was in stopping. It transferred the weight to the rear when I slammed the brakes and the front didn't dip like it used to.

I didn't get any video running flat out even though I wanted to. Just had time constraints since we still had a lot of work to do on it still.
 
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
I finally got a new custom built Currie trussed 9" with 35 spline chromoly and all the goodies. I also installed a 16 gal. fuel cell to give me a total of 39 gal for Baja. That should equate to over 300 miles.
 

Attachments

  • IMG_2240.jpg
    IMG_2240.jpg
    113.1 KB · Views: 171
  • IMG_3896.jpg
    IMG_3896.jpg
    65.6 KB · Views: 169
  • IMG_20140823_123840_285.jpg
    IMG_20140823_123840_285.jpg
    75.1 KB · Views: 178
  • IMG_20140823_123811_568.jpg
    IMG_20140823_123811_568.jpg
    83.3 KB · Views: 166
  • IMG_20140823_123825_551.jpg
    IMG_20140823_123825_551.jpg
    85.6 KB · Views: 163
  • IMG_20140823_123912_817.jpg
    IMG_20140823_123912_817.jpg
    81.7 KB · Views: 132

57baja

Contributor
Full Member
Joined
Jan 6, 2009
Messages
252
I finally got a new custom built Currie trussed 9" with 35 spline chromoly and all the goodies. I also installed a 16 gal. fuel cell to give me a total of 39 gal for Baja. That should equate to over 300 miles.

That looks nice, did you fab that rear set up yourself. I would like to do something similar to mine. Keep up the good work😃
 
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
Thanks 57. It was custom designed and fabricated by www.Temper-MentalRacing.com in Upland CA

It worked flawlessly with my old 9" at the NORRA 1000. I'm really happy with it. I had a bearing retainer come loose about 60 miles or so into the course. There's a great shot of the axle coming out (which really prompted the new Currie) in a video by "Baja535" Chris Sullivan (NORRA #332) https://www.youtube.com/watch?v=KDpYmJW8BUM

Unfortunately they rolled on the last leg going into Cabo. There's a vid on that as well.
 

57baja

Contributor
Full Member
Joined
Jan 6, 2009
Messages
252
Thanks for the info I'm gonna give them a call. I really want to set my bronco up similar to your back half I would love to go pre running.
 

5001craig

Contributor
Bronco Guru
Joined
Nov 3, 2013
Messages
1,180
Awesome build Bukin 67. Thanks for documenting your build. I can't believe I haven't read it already. I follow you some but didn't know you had this thread.

I would love to have my EB ride like yours. That's my goal (or at least closer to the way yours rides). Maybe some day...
 
Top