Another knuckle/disc brake question

[Tonka7777]

Looking to do the knuckle swap to gain more wheel cleareance on a 76 D44. Can I use the 78 Ford truck/Bronco knuckles with my 76 Bronco disc brakes?
Or do I need to get the hubs, spindles, rotors, calipers, etc from the 78?

Thanks!

Jim

 

[broncnaz]

everything is the same except for the actual knuckle. but I would grab the spindles and hub/rotors if possible they are handy to have. actually if you get everything you could probably sell your 76 stuff to someone else.

 

[shamu]

Just look at your camber angle once you install the 78 knuckles. Some are fine and some are way out.