anybody using an aftermarket acclerator assembly

[fordguy]

would like to clean up the firewall just a bit i am ordering a one wire from ray tell what you guys are using in place of the stock assembly

 

[doran4x]

Try Lokar. I have a cable system that is similar to Lokars and it works well.

 

[thegreatjustino]

I'm running BC Broncos cable kit. I could never get the stock linkage adjusted to my liking after I installed my body lift. The cable made the throttle a lot more responsive and cleared a lot of crap out of the engine compartment.

 

[BG's 68 Bronco]

I'm waiting for the BC cable to come. Should clean up the firewall nicely, as mentioned above.

 

[FerrumCampitor]

I'm running a cable out of an '86 E-150. Had to fab my own bracket. Since I did this I saw a Lokar set up and found out it cost barely more than I spent. I'd vote for Lokar now.

 

[TOFIC]

I'm running BC Broncos cable kit. I could never get the stock linkage adjusted to my liking after I installed my body lift. The cable made the throttle a lot more responsive and cleared a lot of crap out of the engine compartment.

times 2 works and looks great.

 

[num]

I'm waiting for the BC cable to come. Should clean up the firewall nicely, as mentioned above.

I've had the BC cable in mine for a year or two with a retrofit TBI. Works really well and has smooth throttle. It was easy to install and complimented the throttle body well for a cleaner conversion.