Anyone know where to find these or similar side mirrors?

[GrillMaster]

Need to find some ASAP for a trip next weekend to Pismo Beach.

Want to run no doors up there.

Thanks in advance

 

[73stallion]

check with 4 wheel parts or any jeep shop, they're off a CJ.

 

[backpain]

x2, I have them also.

 

[mhandy]

if I remember right they are '82 cj mirrors. I have them also

 

[sprdv1]

Want to run no doors up there.

Thanks in advance

Not sure bout these, but it's an option for you

http://www.dietechoffroad.com/products/jkmirrorbracket.htm


I'm sure you could make it so it would fit in the hinge/hole on the Bronco

 

[Izzy]

Check these out? That what you are looking for?

http://collinsbros.stores.yahoo.net/jeepmirrors.html

 

[GrillMaster]

I like the look of the ones in the pics I posted above. I need them to work with doors on and off, would like them in black, metal not plastic, would like them to bolt nicely to some tapped holes in the winshield frame and fold in/pop off if I need to get around a tree etc.

and I am not looking to spend over $75.

 

[thegreatjustino]

As has been mentioned, those are simply CJ mirrors. I bought mine from 4 Wheel Parts nearly a decade ago and have them attached to the windshield frame using nutserts. Mine are chrome and are not plastic and ran around $80 for the set. Should be pretty easy to find black ones I would think.

 

[GrillMaster]

mount holes look small, drill them out? http://cgi.ebay.com/ebaymotors/JEEP...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

wonder if anyone has tried these http://cgi.ebay.com/ebaymotors/97-0...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[GrillMaster]

http://cgi.ebay.com/ebaymotors/Ramp...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

rolling dice on these, looked cool

 

[73stallion]

mount holes are about 1/4" or 5/16", as stated you can use nut-zerts or self tapping screws. you'll have to flip one bracket over as they're usually too wide for the windshield frame.

if you look in my gallery i made some custom brackets few years back for mine, i also used bicycle seat quick release so you can swing them in on the trail, and i put tabs on so i could mount lights.

http://www.4wheelparts.com/Exterior...Kits.aspx?t_c=3&t_s=465&t_pt=3282&t_pl=104890

 

[GrillMaster]

I'm liking those custom mounts 76S! I just ordered the ones listed above... I'll see how they mount and keep you guys up to date.

Thanks Brothers