• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Anyone running 305/70R16's ??

Timmy390

Contributor
Bronco Guru
Joined
Jan 1, 2011
Messages
5,948
Loc.
Conway, AR
Had a blowout so new shoes time. Currently running 265/75R16's but want to run a 33. 2.5SL and 1 inch BL Rear fenders cut

Worried about the section and tread width of the 305 and the uncut front fenders. Section width is 12 inches......

Tim
 

toddsrods

Full Member
Joined
Feb 1, 2011
Messages
200
what about the 285/70r16?
almost 33 high, and not nearly as wide
I find it a good compromise on my f-250
 
OP
OP
Timmy390

Timmy390

Contributor
Bronco Guru
Joined
Jan 1, 2011
Messages
5,948
Loc.
Conway, AR
Good advice........

Did some looking and I think that will work no problems. I'll call it a 33 when ask :)

Everything I own needs new shoes. Just got the wife's car taken care of. Bronco had a flat after the blowout and my 2500HD needs new tires as well. If I keep driving the 14 Shelby as I've been it's going to need them too.

Discount Tire Direct is having a decent sale over the holiday weekend. Either the Bronco or the HD is getting new shoes....

Tim
 
Top