bigjhoov
nobody
- Joined
- Apr 10, 2005
- Messages
- 3,583
Anyone here using the conversion bearing that allow big bearing axles to be used in small bearing housing? I'm being discouraged not to use them because they are wider or something and don't allow the brakes to line up or something like that. No one knows for sure which it is. Just by measuring them they are approx. 1/4" wider that original. Just curious if anyone has had a problem with them.
I would have just bought some alloy 28 splines and been happy but I think I blew the Detroit the same time I popped an axle. My other option is to find a 74-75 housing so I can run big bearings with my 10" brakes, or just get a big bearing housing and 11" brakes.
I don't want to get the 31 spline small bearing axles because I think that severely limits me as far as spares. I think that is getting too rare to be able to find replacements in the future.
I would have just bought some alloy 28 splines and been happy but I think I blew the Detroit the same time I popped an axle. My other option is to find a 74-75 housing so I can run big bearings with my 10" brakes, or just get a big bearing housing and 11" brakes.
I don't want to get the 31 spline small bearing axles because I think that severely limits me as far as spares. I think that is getting too rare to be able to find replacements in the future.











