Madgyver
Bronco Madman
- Joined
- Jul 30, 2001
- Messages
- 15,030
I had to fabricate a tracbar riser mount on the FW HP dana44..
I used a 4"x2"x.25" rectangle tude
here are the pics...
I used a 4"x2"x.25" rectangle tude
here are the pics...
Attachments
-
66438950_10214743514327564_1945825570424094720_o.jpg120.9 KB · Views: 80 -
64284102_10214743516007606_6934763077837520896_o.jpg124 KB · Views: 74 -
66317134_10214743518487668_2327061126908477440_o.jpg141 KB · Views: 77 -
66407899_10214744335148084_3139194074842529792_o.jpg124.6 KB · Views: 81 -
66434057_10214744335508093_7363888447385239552_o.jpg76.4 KB · Views: 97










