• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Bearing Puller Tool

kelpy

Jr. Member
Joined
Aug 14, 2005
Messages
58
I have to remove the output shaft bearing on a 3 speed but can't find a source for the split collet type puller/installer. Does anyone have one in SoCal that would sell it or know of a source? I have checked the auto parts stores/ rental stores but no luck there.
 

ugly74

Bronco abuser
Joined
Apr 17, 2006
Messages
2,856
Loc.
Colorado
do you have a Northern Tool catalog? they have all kinds of pullers. not always the best quality (chinese yuck) but they work for a while
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
complete off road sells em. They are for diff bearings but it sounds like the tool you're looking for.
 

70bronco

Full Member
Joined
Jun 29, 2003
Messages
305
Loc.
Kingsburg, CA
If this is what you need then Harbor Freight has them for $20.
 

Attachments

  • 03979.gif
    03979.gif
    21.5 KB · Views: 16
OP
OP
K

kelpy

Jr. Member
Joined
Aug 14, 2005
Messages
58
I'll see if the Complete Offroad ones will fit the snap ring groove. I have a few of the split bearing removers shown but it would take a lot of grinding on the backside to get it to fit. Maybe just grind down a two leg puller to fit the groove.
Thanks for the help.
 
Top