• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

best match door insert

bam

Contributor
Full Member
Joined
Jun 11, 2017
Messages
291
Loc.
Laurel, Ms
who makes the best matching door inserts to the original that was made for the u13.
 

okie4570

Contributor
Bronco Guru
Joined
Jul 16, 2012
Messages
9,537
Loc.
NW OK
Not sure about the fiberglass insert itself, but you want to get a set of backings that Gas Pig is getting ready to reproduce.
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
The original inserts were press molded and have smooth backs and consistent thickness on the edges. This makes the original steel insert plates fit nice and clean when riveted together. So far I haven't seen replacement inserts with a consistent fiberglass edge since they are hand laid up. The factory inserts fit the door openings pretty nice. reproductions fit from OK to very poorly. Some of it is the old broncos fault and some of it is in the molds used in the hand layups of the reproductions. When I repainted my 74 Bronco with door inserts I used one piece inserts with the backing being fiberglass and the inner and outsides molded in one piece. While this is considered a great piece in today's world I spent hundreds of hours getting them to fit the way I wanted them to.

But I wasn't trying to get a reproduction original 66 roadster look either. You need to go to an event and see the difference between stock factory Ford inserts and backing plates and what reproduction stuff looks like installed. Its all in the little details. In 40 years I've only run across 1 set of original ford inserts off a Bronco for sale and they were pretty rough shape. But I sure kick myself in the head for not buying them now. They were a little more than the price for a new set of aftermarkets. But back then these were just old trucks.
 
OP
OP
bam

bam

Contributor
Full Member
Joined
Jun 11, 2017
Messages
291
Loc.
Laurel, Ms
Not sure about the fiberglass insert itself, but you want to get a set of backings that Gas Pig is getting ready to reproduce.

im on gas pig list. im missing the passenger side insert. I have a 66 u13 that im doing a patina look build and I have come to the conclusion that there are not any oem inserts (used) out there. so I was going to by a reproduction insert to go along with my one original. I wanted to know who sold the best match to oem.
 

okie4570

Contributor
Bronco Guru
Joined
Jul 16, 2012
Messages
9,537
Loc.
NW OK
Yeah theyre going to be hard to come by. The only used ones I've ever seen for sale were laying in the back of the roadsters that were for sale themselves lol.
 

Crush

Contributor
Bronco Guru
Joined
May 30, 2007
Messages
3,463
Loc.
Greenbottom, WV
Someone around here has only one. There has to be. Now if it is the one you need. Who knows? Lol. Did you post in the wanted bronco parts section?
 
OP
OP
bam

bam

Contributor
Full Member
Joined
Jun 11, 2017
Messages
291
Loc.
Laurel, Ms
Someone around here has only one. There has to be. Now if it is the one you need. Who knows? Lol. Did you post in the wanted bronco parts section?

I did. that's what I thought.
 
Top