roundhouse
Bronco Guru
- Joined
- Sep 5, 2003
- Messages
- 2,956
One of those breakages that happens when several things go wrong all at once.
Doing a little light backyard wheeling, and while going up a steep hill I hear a clank and start rolling backwards.
Turns out the front drive shaft came lose from the t case.
Seems that 2 of the bolts holding the shaft to the tcase yoke were missing. One of the remaining bolts sheared off and the last one took a nice chunk of the shaft yoke with it when it broke.
Also boogered up the D-20 yoke.
I have a twin stick, seems that I had been wheeling in front drive only..... Thats why it starting rolling backwards when the front shaft came loose.
I took some pics with my camera phone, but cant figure out how to get them off the phone. Its a Nokia 6085 if anyone knows how to get em out......
On the good side, I did pick up another shaft and D-20 for $150 from a guy that had some EB parts listed on Craigslist.
Turns out he has 5 or 6 EBs is various stages of building or parting out. The one he was building had efi, AOD, etc.
Has a large stash of parts.
He had heard of CB.com but wasnt a member.
Also met another EB owner with a 66 that was all original except for the EFI. And was apparently ordered with the 289, bulkhead, and doors, but no top or upper window frames.
He had these slot mags for sale
http://atlanta.craigslist.org/pts/766852107.html
but I didnt like the offset, and they were a little narrow for my 12.50s
They did fit 31x9.50s in his uncut, unlifted rear fenders, though.
Doing a little light backyard wheeling, and while going up a steep hill I hear a clank and start rolling backwards.
Turns out the front drive shaft came lose from the t case.
Seems that 2 of the bolts holding the shaft to the tcase yoke were missing. One of the remaining bolts sheared off and the last one took a nice chunk of the shaft yoke with it when it broke.
Also boogered up the D-20 yoke.
I have a twin stick, seems that I had been wheeling in front drive only..... Thats why it starting rolling backwards when the front shaft came loose.
I took some pics with my camera phone, but cant figure out how to get them off the phone. Its a Nokia 6085 if anyone knows how to get em out......
On the good side, I did pick up another shaft and D-20 for $150 from a guy that had some EB parts listed on Craigslist.
Turns out he has 5 or 6 EBs is various stages of building or parting out. The one he was building had efi, AOD, etc.
Has a large stash of parts.
He had heard of CB.com but wasnt a member.
Also met another EB owner with a 66 that was all original except for the EFI. And was apparently ordered with the 289, bulkhead, and doors, but no top or upper window frames.
He had these slot mags for sale
http://atlanta.craigslist.org/pts/766852107.html
but I didnt like the offset, and they were a little narrow for my 12.50s
They did fit 31x9.50s in his uncut, unlifted rear fenders, though.











