• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Blasting? Grinding? Prep for "Line-X"

OP
OP
ObscureMachine

ObscureMachine

Seatbelt Orifice Officer
Joined
Sep 28, 2006
Messages
3,998
Loc.
World Headquarters
I just purchased the entire platform and pans pre welded, I have not put it in but looking at it I would say it will be much easier to replace the whole thing rather than piecce by piece.

The problem is that the driver floor pan and tunnel cover are new. So it seems like kind of a waste to go with a whole setup.
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
You know, I haven't had time to work on the bronco, so it sat. Now that I have time to work on the bronco, I have no time to do a frame-off, because I have to get certain things done before the rains set in, and before the Mustang is gone.

Now that I have time............. I have no time! Kinda ironic.

This stuff will just make the frame off I do later easier and faster! Yeah, yeah, that's it. Yeah. ;) :p ;D

My problem was when I had the time I didn't have the money, When I had the money I didn't have the time. Working for a living just gets in the way.

Now as I am older I have the time and some money but since I work outside with the Bronco weather becomes an issue. Last winter it rained all weekend every weekend and this summer its been 95-110 every weekend. At my age extreme weather mechanics is out the door for me so stuff has to wait. It all turns around in time.
 

markw

Contributor
Bronco Guru
Joined
Sep 10, 2009
Messages
2,066
I'd go after that mess with a power chisel and see what you have left to linex.
 

Jamie Chriss

Sr. Member
Joined
Feb 28, 2015
Messages
577
FYI I spent three weeks removing bondo, texture etc off my bed, I was ready to primer the bed yesterday and I was so disgusted with how many pit there were I ended up tearing the floor up. I just wasted so much time polishing the turd. Hard lessons learned.
 
Top