Bolt In Grab Handle?

[matt w]

Anyone know where I can get something like this that will bolt onto my dash bar in my cage? I did not want one built into my cage whe I had it built BUT I would not mind bolting one in/on for trail rides for the wife! ;D

 

[matt w]

Never mind! WOW that is pricy! I would like to spend less!!

 

[BroncoDawg]

Pricey? maybe somewhat, but consider the time in R&D, the time machining, marketing and the quality of the product. Get yourself a simple handle from the hardware store and hose clamps if that's what you want, but is that really how you want your rig to look after all the work you've put into it?
Jus' sayin' because the price of everything has gone up.

 

[asinor]

If you can weld, it would be easy to make some out of tube clamps, plate and a piece of tubing, just a home made version of the one in Matt's post.

 

[gnpenning]

Matt you have fab skills but I think you value your time. How about doing something like you did on your bike rack? Put some nut inserts in the cross bar then install/uninstall as needed. Or??

 

[matt w]

Matt you have fab skills but I think you value your time. How about doing something like you did on your bike rack? Put some nut inserts in the cross bar then install/uninstall as needed. Or??

Yep I have been considering that as well! Thanks for the atta-boy! ;>}

 

[garberz]

Never mind! WOW that is pricy! I would like to spend less!!

The only thing on your Bronco that's for your wife, and you're saying it's too pricey, and you want to spend less. Sounds like your saying "she's not worth it", you better hope she doesn't read these threads. ;D

 

[kiddingknot]

Never mind! WOW that is pricy! I would like to spend less!!

That's a great looking handle. What IS the price?

 

[Past_Miner]

These tube clamps are pricey too but a couple of them and a little welding and it could be LESS pricey. I know they work well and it would be removable.

http://www.lowrangeoffroad.com/index.php/o-d-tube-clamps.html

 

[matt w]

The only thing on your Bronco that's for your wife, and you're saying it's too pricey, and you want to spend less. Sounds like your saying "she's not worth it", you better hope she doesn't read these threads. ;D

wow those are several good points

 

[malonejy]

That's a great looking handle. What IS the price?

I'm not sure why matt w wont tell us the secret of where if found that handle ;D, but I did find these.

Looks pretty cool but pricey

Price is reasonable, but need to verify diameter

 

[matt w]

I'm not sure why matt w wont tell us the secret of where if found that handle ;D, but I did find these.

Looks pretty cool but pricey

Price is reasonable, but need to verify diameter

Well I am not at my home computer but is was on a Jeep 4x site. I want to say 4wheeldrivehardware cost was 79.00 I will check when I get home tonight

 

[xcntrk]

I'm going to make my own tube clamps and make up one of these...

 

[matt w]

Here is where I saw them: http://www.quadratec.com/products/14018_1401.htm

 

[garberz]

Here's one that my wheeling buddy makes. And he also make a lot of other accessories. Look through his site.

http://fourtreks.com/roll_bar_handle.html

This was from last Sept.

 

[malonejy]

Here's one that my wheeling buddy makes. And he also make a lot of other accessories. Look through his site.

http://fourtreks.com/roll_bar_handle.html

This was from last Sept.

I met Luke a few years ago out at KOH. Seems like a nice guy. I just wish his stuff was a little easier on the wallet. It is top notch stuff though!

 

[sprdv1]

another vote for four treks... great stuff

http://www.fourtreks.com/roll_bar.html

 

[Fourtreks]

I really appreciate the good thoughts and words that were posted on this forum about my products throughout the years. I also appreciate the good words about me as well. Thanks guys!

If you are interested in a particular Fourtreks product and find it to be a bit pricey give me a call or email me at fourtreks@hotmail.com . I am pretty easy to talk to and work with. I have owned my Bronco for over 20 years. So I am going to be partial to fellow Bronco owners for sure. Maybe we can work something out.

 

[matt w]

I really appreciate the good thoughts and words that were posted on this forum about my products throughout the years. I also appreciate the good words about me as well. Thanks guys!

If you are interested in a particular Fourtreks product and find it to be a bit pricey give me a call or email me at fourtreks@hotmail.com . I am pretty easy to talk to and work with. I have owned my Bronco for over 20 years. So I am going to be partial to fellow Bronco owners for sure. Maybe we can work something out.

Your welcome!...I started the post! heh-heh

 

[SSDDBRONCO]

Possibly a group buy??

Sent from my SPH-D710 using Tapatalk 2