• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Bouncing Speedometer

Rocko1012

Full Member
Joined
Nov 20, 2016
Messages
225
Speedo Refurbished, New Speedo Cable, ETC. Bounces all over the place.
Does New Cable need to be Lubed? Will Probably disconnect and forget about it.
 

1970 Palmer

Sr. Member
Joined
Mar 2, 2020
Messages
454
Lube with the OLD SCHOOL long fiber wheel bearing grease. Make sure you have a smooth direct routing for the housing, no kinks.
 

1970 Palmer

Sr. Member
Joined
Mar 2, 2020
Messages
454
What is long fiber grease? Thanks

It's what used to be considered as "normal wheel bearing grease" back in the days before moly grease came out for disc brake applications.

It's very sticky and is perfect for dampening the torsional wind up of the mechanical speedo cable.

A customer complaint of a jumping speedo was very common on a repair order in the 1960's, I think I did at least "one a week" in the Ford dealership.

I still have my hand made speedo cable wrench. It was a 3/4" cheap box end, cut down to about two inches long. The box end was cut open to allow the wrench to slide over the cable. It works like a tubing wrench. The short wrench gave you just enough leverage to break the hex nut loose with your hand in a awkward position up under a dash.
 
Top