• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Bronco Height

colbythekid

New Member
Joined
Dec 12, 2020
Messages
10
Hello,

I am looking to lifting and installing larger tires on my 73' but looking at the height of my garage door I might have to limit what I do.

Does anyone have the total height of their rig with a 5" lift with 35" tires? I was also looking at a 2" body lift, but can take that out of the equation if the rest puts me too high.

My garage door is 7' exactly.

I am assuming that there will be plenty of space, but don't want to find out the hard way.

Thank you in advance!

Colby
 

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
That’s a lot of lift for 35s. Is your bronco uncut?
 

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
15,030
you won't fit.
I did it 37" and a 5.5" lift and now going lower. you won't like climbing in if you drive it everyday. I built a removable step that could be removed when I go off road. Driving in off camber situation are sketchy, you feel the body roll. You don't want a bodylift.


Im keeping the 37"s and going down to 3" lift with fenders cut to bodyline. Low COG is best. And you'll fit in the mall garages.
 

Attachments

  • 95127693_10217175228398896_2119331799527063552_o.jpg
    95127693_10217175228398896_2119331799527063552_o.jpg
    468.4 KB · Views: 62
OP
OP
C

colbythekid

New Member
Joined
Dec 12, 2020
Messages
10
That’s a lot of lift for 35s. Is your bronco uncut?

The rear is cut, the front not... yet.

Assuming you are saying I can get away with a smaller lift with 35" tires?

Not sure where I got the idea we needed to hit 5" for 35s.

Thank you for your input.
 
OP
OP
C

colbythekid

New Member
Joined
Dec 12, 2020
Messages
10
you won't fit.
I did it 37" and a 5.5" lift and now going lower. you won't like climbing in if you drive it everyday. I built a removable step that could be removed when I go off road. Driving in off camber situation are sketchy, you feel the body roll. You don't want a bodylift.


Im keeping the 37"s and going down to 3" lift with fenders cut to bodyline. Low COG is best. And you'll fit in the mall garages.
37"!

Is there any rubbing when turning?

I don't mind trimming body.
 

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
Yeah I ran 35s with a 2.5” lift for a long time. You can do a lot after cutting the fenders especially if you go up to the body line like Mad is saying. I’m running 37s with 3.5” lift right now.

Well actually it’s 2.5” rear springs and 3.5” coils up front.
 

Attachments

  • IMG_0459.jpeg
    IMG_0459.jpeg
    311.6 KB · Views: 94
  • IMG_0458.jpeg
    IMG_0458.jpeg
    309.7 KB · Views: 86

Tricky Dick

Sr. Member
Joined
Jul 13, 2023
Messages
588
Not sure where I got the idea we needed to hit 5" for 35s.
I'm still pretty green to these but the charts I saw suggested 3.5" for 35s, and I think that assumes a lot less cutting than Madgyver but EBs look so mean with flares at the body line.
 

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
37"!

Is there any rubbing when turning?

I don't mind trimming body.
You’ll rub on radius arms most likely. All depends on wheels and spacers and things like that. I’ve got trex arms from JD and no rubbing and full lock to lock steering.
 

ep67bro

Contributor
Bronco Junky
Joined
Aug 28, 2008
Messages
3,873
Loc.
Easton, MD
I have 35s 3.5" suspension and 1" body. No body rub, slight rub on Radius arms at full lock. I can fit it into my garage at home but just barely. if I was running 37s it would hit. I am not at home but my garage is your standard garage door height.
 

ba123

Contributor
Bronco Guru
Joined
Oct 29, 2022
Messages
2,760
Loc.
CA
Yeah, I doubt you’ll fit and even less likely with a hard top.

My garage door is 7’ and it’s close with 35’s and a 3.5”/1”bl, but I guess you’re would just be a half inch more and I have no maybe but also depends on the tires. Just cause they’re 35” tires, doesn’t mean they are 35” tires… most are under that, some are more.
 
Last edited:

abn373

Contributor
Sr. Member
Joined
Jan 6, 2012
Messages
420
Loc.
Charleston, SC
7 ft door. When I had 35s with a 3" suspension lift (old school), if I had my Bestop soft top on I would hit the middle bow on the bottom of the garage door itself, which hung down slightly below the door frame. I switched from a hand lifted door to a garage door opener and set the opener to crank the door up as far as it could, so it was above the door frame opening. Then I fit without hitting (barely). Then I changed to a more modern 3 1/2" spring this winter, same 35s and still no body lift. I fit in and out of the 7' garage door, but I haven't put my soft top back on yet (and I don't plan on ever putting it back on becuse I live in South Carolina and its miserable in it with the softop on, so no top for me) but I suspect I may hit the garage door frame with the Bestop on.

BTW, I was fine with 3" suspension lift and 35s, with your standard Bushwacker flares front and rear, no crazy trimming and I never rubbed anything but the radius arms, but that is not changed by adding more lift.
 
OP
OP
C

colbythekid

New Member
Joined
Dec 12, 2020
Messages
10
Thank you all for your input.

Next part of the adventure is picking out a lift kit.

Colby
 
Top