cannot find source of trouble

[blue bronc]

I have posted this week on my trouble with my ignition. I have gotten some great suggestions on trouble shooting.
I have had the coil tested and it was good. The guy at the race shop told me that the ignition box would either work or it would not. No in between.
I have checked every ground all the wire connections the plug wires are in good shape. I am all out. I have no idea where to go next.

Any ideas?

 

[billh1289]

What kind of ignition are you running? What are the symptoms?

 

[tsmustangs]

Run a wire directly from the battery post to the coil and Dist to bybass all wires. Use a remote starter to turn the motor over and have one of the plugs out and connect to a plug wire and look for spark. Well give you an idea.

Terry

 

[astark]

Call MSD tech and they will guide you through a simple test procedure to isolate the problem. If you are running one of their distributors it could be a cracked magnetic pick up.

I had a simular problem and this was what it was

http://www.msdignition.com/dist_66.htm

You can contact them here

http://www.msdignition.com/1support.htm