• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

cb antenna

unclebap

Sr. Member
Joined
Jul 28, 2001
Messages
820
Loc.
High Desert, ca
Need to find a new cb antenna,broke my last gas station light with my whip,also need something I wont tear off getting into the garage.
 

RajinCajun

Bronco Guru
Joined
Nov 22, 2003
Messages
1,587
Loc.
HawleyTX, La orig.
Sorry Grizzly.. but I have to put this up. I have been doing a lot of reading lately on CB's to get caught back up on the new technology.. I grew up using the stainless steel 102" whip with the 6" spring, but occasionaly used a firestick on some rigs.. But after seeing some real world testing the better fiberglass antennas are the Wilson SilverLoad, which is adjustable, and the Evernhart that looks really like the Wilson. The other option is the base load style like the Wilson 1000 or K40. I am running a Wilson Silverload 5' on my Bronco and it works great and has taken some abuse :)
Check this thread out http://www.cbradiotalk.com/viewtopic.php?t=6316
Not trying to push another site here, but you share the good information when you find it :)
 

Attachments

  • SmallAntennashot.JPG
    SmallAntennashot.JPG
    47.1 KB · Views: 137

YellowBronc

Bronco God
Joined
Jan 6, 2002
Messages
1,830
I've heard good things about the firestiks but I've never owned one. I'm currently using a Wilson and have been happy with it. Now that I've read the site from RajinCajun, it sounds like the Silverload is the way to go.

My Wilson is adjustable and it was by far the easiest to tune to the radio. I've had other antenna's that were difficult to tune. The key is to definetly get a good antenna with good coax.

Good luck in your choice.
 

GRIZZLY

Bronco Guru
Joined
Jul 31, 2001
Messages
3,221
Loc.
Lakewood, CA
No sweat Ragin the more info the better. Firestiks were pretty popular out here and can stand a fair amount of abuse. I usually only worry about keeping in touch with the folks on our runs anyway.
 

RajinCajun

Bronco Guru
Joined
Nov 22, 2003
Messages
1,587
Loc.
HawleyTX, La orig.
Thanks, I like to pass that info around when I can.. there a lot of CB smart folks over there.. I spend quite a bit of time there too.. I have learned a lot over there.. it has been good to catch up on the newest techno since I was into CB's several years ago..

I am with you about running the firestick to keep in touch with folks on the trail, I have used them myself for a while. BUT a good radio set up has come in handy a couple times to get ahold of someone that went back to camp to grab some tools.... no one else could get out to them but my little Cobra 25 that has been tuned up a little, and custom built coax and antenna mount with the Wilson Silverload.. :) Made the extra time for buing the coax by the foot and soldering the ends on, then checking my SWR's worth it ;)
 

YellowBronc

Bronco God
Joined
Jan 6, 2002
Messages
1,830
RajinCajun said:
BUT a good radio set up has come in handy a couple times to get ahold of someone that went back to camp to grab some tools.... no one else could get out to them but my little Cobra 25 that has been tuned up a little, and custom built coax and antenna mount with the Wilson Silverload.. :) Made the extra time for buing the coax by the foot and soldering the ends on, then checking my SWR's worth it ;)
You're absolutly right about having your equipment set up well. My example was at the last OCBR when there was a vehicle roll over. I was the only one at camp that could hear them and respond to their calls. I was able to get an ambulance on the way before they got the couple out of the trails and to the parking lot. The ambulance and the injured almost arrived at the parking lot at the same time.
 

Landshark

Sr. Member
Joined
Dec 22, 2002
Messages
440
Loc.
California
RajinCajun said:
Thanks, I like to pass that info around when I can.. there a lot of CB smart folks over there.. I spend quite a bit of time there too.. I have learned a lot over there.. it has been good to catch up on the newest techno since I was into CB's several years ago..

I am with you about running the firestick to keep in touch with folks on the trail, I have used them myself for a while. BUT a good radio set up has come in handy a couple times to get ahold of someone that went back to camp to grab some tools.... no one else could get out to them but my little Cobra 25 that has been tuned up a little, and custom built coax and antenna mount with the Wilson Silverload.. :) Made the extra time for buing the coax by the foot and soldering the ends on, then checking my SWR's worth it ;)

Howdy, one of my favorite subjects!!!! Antenna, Antenna Antenna. You can have the best radio, amp, mic etc, but without a good antenna their worthless. 102" SS whip is the best performing antenna, but is the most practical? no! I like the Firesticks, but they are fiberglass and prone to breaking when smacked hard against a tree limb. I would recommend a base loaded antenna, less obtrusive and not likely to hit or break when in contact of a wood product. When I meant base load, a Wilson or K40 or similar type of antenna. They make them in both permanent or magnet mount style. Otherwise you will get better performance with a longer antenna, so if you want get one of those with a quick disconnect mount, so you can take it off when wheeling.
 
Last edited:

feitctaj

FNG
Joined
May 3, 2003
Messages
4,319
Loc.
Group W Bench
I have 2 K-40s and one is beaten on the bottom of Bridges daily,
I use it on my 22 wheeler, the other is on my EB.
They are both over 20 years old ,and both get 200 extraWats ( Palamar)
Not a single problem.
I can't use Firestix as they won't last one day at work
 

eds66bronco

Bronco Guru
Joined
Aug 3, 2004
Messages
1,119
Loc.
Essex, Vermont
i got the Wilson SilveLoad and used the firestik coax but can't seem to eliminate my fuel pump noise. no RF noise while the engine is off but as soon as i fire it up i can't hear anything over the noise untill i jack up the squelch.

antenna is mounted to the spare tire carrier and that is grounded to frame. i have checked for opens and shorts and dialed in the signal with my swr meter. i have narrowed it down to the low pressure fuel pump (Carter). i disconnected the coax with the engine running and the noise went away so i disconnected the carter pump and had the same result. i tried rerouting the coax a bunch of different ways but it made no difference. sorry to hijack the thread but i'd really like to get this figured out. other things i've tried is adding a capacitor between the power and ground at the fuel pump, grounding the body. grounding the exhaust, grounding the antenna mount to the frame.
any other suggestions would be great.

Rajin, that was a great link and i poured through it for several hours only to find i've already tried all the suggestions on there short of getting a different radio or truck
 

astark

Bronco God
Joined
Jun 16, 2001
Messages
7,350
Is your radio wired directly to the battery, if not try that.
 

eds66bronco

Bronco Guru
Joined
Aug 3, 2004
Messages
1,119
Loc.
Essex, Vermont
yup, i had it wired from the fuse panel and and from the ignition power post and that didn't make a difference. i also tried different spots for the ground- dash, cage, direct to battery... no change. so i eliminated dirty power as the problem due to the fact that i can get it quiet by disconnecting the coax. is this the correct logic?
 

astark

Bronco God
Joined
Jun 16, 2001
Messages
7,350
I also run an electric fuel pump and by running my power directly from the positive terminal on the battery to the radio, and ground from the radio to the power steering bracket I have no unusual noise.
 

eds66bronco

Bronco Guru
Joined
Aug 3, 2004
Messages
1,119
Loc.
Essex, Vermont
astark said:
I also run an electric fuel pump and by running my power directly from the positive terminal on the battery to the radio, and ground from the radio to the power steering bracket I have no unusual noise.
i'll try moving the ground to a few more places but i think the problem is rf noise from the pump being picked up by the antenna, not a power/grounding issue.
 

twisted_mr

Full Member
Joined
Aug 12, 2006
Messages
182
Loc.
Calion, AR
Check your grounds, particularly at the cb unit and the antenna mount. Noise filter on the power wire of the cb and you should be good to go I would think. Been awhile since I have messed w/ cb's tho. Been thinking about one for the short bus. Good luck, Terry Ps...you might try replacing the coax cable too or at least the ends (thinking bad connection possibly?) If the mike screws on make sure it's tight. ... all I can think of...
 

eds66bronco

Bronco Guru
Joined
Aug 3, 2004
Messages
1,119
Loc.
Essex, Vermont
i checked all grounds with a ohm meter and have continuity at all connections. a noise filter would only be helpful if the noise was coming from the power source (plug wires, ignition, fuel injectors, etc.)?? but it isn't. if i disconnect the low pressure fuel pump, all the noise goes away. the coax is brand new firestik coax with soldered connectors (again i checked contiuity before connecting to the radio) so that isn't it.

thanks for the suggestions
 

twisted_mr

Full Member
Joined
Aug 12, 2006
Messages
182
Loc.
Calion, AR
your fuel pump is connected to pwr source, correct? Noise filter on power to cb is my recommendation (still). Worth trying imo.
 

RajinCajun

Bronco Guru
Joined
Nov 22, 2003
Messages
1,587
Loc.
HawleyTX, La orig.
From what I have read, you will not be able to get all of the fuel pump whine out of the radio on a Ford.. For some reason it usually can not be completely eliminated. Just turn your squelch up :) I am only using the HP pump from an F150 for my EFI swap into the Bronco and it doesn't seem to bother my CB that I can remember that is..?? Maybe it is the low press pump that is causing it... Hummm..
 

eds66bronco

Bronco Guru
Joined
Aug 3, 2004
Messages
1,119
Loc.
Essex, Vermont
it is only the lp pump. i can disconnect it and all the noise goes away (and the motor still runs at idle.) i'm not sure my airtex hp pump would be able to draw from my tank without the carter pump. i have the lp carter pump feeding an accumulator with the hp pump drawing out of that. where is the best place to get a noise filter.
 
Top