• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Center mount anti-wrap bars?'s

74lumenaire

Jr. Member
Joined
Feb 1, 2012
Messages
139
Loc.
Clarkston
Anyone have pics of a top of the pumpkin center mount anti-wrap bar? Has anyone fabbed one, or does someone sell one?
 

ScanmanSteven

Bronco Guru
Joined
Dec 19, 2010
Messages
1,129
Here's a picture of mine. David aka Spareparts fabbed it up.
 

Attachments

  • IMG_5591.jpg
    IMG_5591.jpg
    98.3 KB · Views: 162
  • IMG_5592.jpg
    IMG_5592.jpg
    109.3 KB · Views: 164

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
Here's a 3 point mount, spreads the load out and kept me from replacing bushings on a "wrap trap" style bar every 6 months...

I ran this for at least a dozen years...replaced the bushings once...totally eliminated wrap. This was a install pic as you can see a couple things not finished up in the pic.
 

Attachments

  • DSCF0236.jpg
    DSCF0236.jpg
    126.9 KB · Views: 137

Skiddy

Bronco Guru
Joined
Oct 8, 2003
Messages
11,587
Here's a 3 point mount, spreads the load out and kept me from replacing bushings on a "wrap trap" style bar every 6 months...

I ran this for at least a dozen years...replaced the bushings once...totally eliminated wrap. This was a install pic as you can see a couple things not finished up in the pic.
looks like it doesn't put all the stress at one point on the axle as well
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
That's why I mentioned the 3 pt mount. I've seen several housings ripped wide open from the stress...

I'd update the design if I built another but I've gone 4 link...

I did snap this DOM tubing in half one day... strrroker plus deep gears...
 
Last edited:

74 Bronco Billy

Contributor
Sr. Member
Joined
Jul 4, 2016
Messages
798
WH Wrap Trap

Here's some pics of the WH Wrap Trap welded to the top of the Ford 9"
(pardon the welds, very windy day)
 

Attachments

  • WH Wrap Trap Front.jpg
    WH Wrap Trap Front.jpg
    103.5 KB · Views: 118
  • WH wrap trap lt.jpg
    WH wrap trap lt.jpg
    136 KB · Views: 80
  • WH Wrap Trap inside weld through heat marks.jpg
    WH Wrap Trap inside weld through heat marks.jpg
    168.9 KB · Views: 117

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
I've been thinking about using something like the skidplate migs has on the bottom of his rear end for a reinforcement plate on top to weld the Wrap Trap mount to.
 
Top